RunPeriod-2019-11 Validation

Trigger Spreadsheet

December 2019 Run

• Straight track runs: Starting around 70652, until 70786
• TOF/CDC HV scans: 70817 - 70828
• Initial commissioning runs (not everything read out): 70829 - 70834
• DIRC commissioning runs (no PS): 70835 - 70892
  • Bad TOF HV: 70874 - 70892
  • Lost data: 70850 - 70895
  • TRD/GEM data: 70959 - 70963
• 2nd round of DIRC commissioning runs (better TOF HV, rocfcal1 restored): 70967-
  • raw mode tests with updated ST firmware: 70995 - 71000
  • production mode with updated ST firmware: 71002 -71206 (?)
  • more firmware fixes on part of the FCAL: 71207 -

2020 Run

Calibration/Tuning

• Calibration:
  • AMO: 71336, 71344
  • Diamond: 71345, 71346, 71347
  • bad PS settings? it looks like it might be okay, but Sasha said readout thresholds should be optimized
• Raw mode: 71337
  • short raw mode runs: 71338-71343

Arbitrarily end it here and start production counting. The diamond runs could potentially count as production?

Physics Production Runs

Summary spreadsheet

• Starting at: 71350

0 (PARA)	71354, 71360, 71368, 71370, 71377, 71404, 71466, 71474, 71483, 71492, 71493, 71501, 71515, 71521, 71528, 71537, 71545, 71553, 71559, 71588
90 (PERP)	71355, 71362, 71363, 71369, 71378, 71382, 71395, 71396, 71405 , 71467, 71475, 71484, 71494, 71502, 71516, 71522, 71529, 71538, 71546, 71554, 71560, 71589, 71590
45 (PERP)	71353, 71357, 71365, 71372, 71373, 71401 ,71429, 71430, 71431, 71463, 71464, 71469, 71470, 71477, 71478, 71486, 71487, 71498,71511,71512, 71518, 71526, 71535, 71540, 71543, 71550, 71557, 71563, 71585, 71594
-45 (PARA)	71350, 71356, 71364, 71371, 71397, 71398, 71400, 71406, 71428, 71468, 71476, 71485, 71497, 71510, 71517, 71524, 71525, 71530, 71539, 71548, 71556, 71561, 71591, 71592, 71593
AMO	71351, 71352, 71358, 71359, 71375, 71402 , 71465, 71472, 71473, 71482, 71490 71491, 71500,71514,71519,71520, 71527, 71536, 71544, 71551, 71558, 71586, 71587

Up to: 71594

• 150nA: 71350 - 71463
• 250nA: 71464 - 71591
• 350nA: 71592 -

• new tagger/PS firmware - 71499+

Notes

• CDC noise, should junk: 71360
• CDC Occupancy: 71507
• junk: 71376, 71407, 71488, 71489, 71495, 71496, 71505, 71508, 71509, 71541
• bad DAQ, junk: 71398, 71523, 71547
• L1 trigger studies: 71409, 71410, 71412, 71413, 71419 - 71427
• empty target: 71462, 71532, 71533
• Missing from Logbook and RCDB: 71503, 71504
• Calibration Testing: 71506
• Comcal testing: 71564-71584
• Cryomodule error: 71513
• Beam Down: 71531, 71534, 71542, 71552, 71555
• TOF dead module: 71549
• Need to check data quality: 71562
• Missing tiles from DIRC: 71366, 71367, 71397, 71595