Difference between revisions of "RunPeriod-2021-09 Validation"
From GlueXWiki
(→Run list) |
(→FCAL) |
||
| Line 9: | Line 9: | ||
=== FCAL === | === FCAL === | ||
| + | |||
| + | |||
| + | FCAL HV scan: | ||
| + | * [https://halldweb.jlab.org/primexd/phase-II/FCAL-HV-scan/bias15V/ '''Blue LED 100Hz continuous 15V'''] | ||
| + | **HV set to 1500V -> 80280 | ||
| + | **HV set to 1550V -> 80284 | ||
| + | **HV set to 1600V -> 80285 | ||
| + | **HV set to 1650V -> 80286 | ||
| + | **HV set to 1700V -> 80287 | ||
| + | **HV set to 1750V -> 80288 | ||
| + | **HV set to 1800V -> 80289 | ||
| + | * [https://halldweb.jlab.org/primexd/phase-II/FCAL-HV-scan/bias10V/ '''Blue LED 100Hz continuous 10V'''] | ||
| + | **HV set to 1800V -> 80290 | ||
| + | **HV set to 1750V -> 80292 | ||
| + | **HV set to 1700V -> 80293 | ||
| + | **HV set to 1650V -> 80294 | ||
| + | **HV set to 1600V -> 80295 | ||
| + | **HV set to 1550V -> 80296 | ||
| + | **HV set to 1500V -> 80297 | ||
=== CCAL === | === CCAL === | ||
Revision as of 16:46, 2 September 2021
Contents
Monitoring Team
Run list
Note on monitoring launches
PS and Tagger Calibration
FCAL
FCAL HV scan:
- Blue LED 100Hz continuous 15V
- HV set to 1500V -> 80280
- HV set to 1550V -> 80284
- HV set to 1600V -> 80285
- HV set to 1650V -> 80286
- HV set to 1700V -> 80287
- HV set to 1750V -> 80288
- HV set to 1800V -> 80289
- Blue LED 100Hz continuous 10V
- HV set to 1800V -> 80290
- HV set to 1750V -> 80292
- HV set to 1700V -> 80293
- HV set to 1650V -> 80294
- HV set to 1600V -> 80295
- HV set to 1550V -> 80296
- HV set to 1500V -> 80297
