Run Table

Click on the 'edit' tab above to record an entry in the table below.

                                                 <-       BCAL         ->
Run No Date  Time  Curr. Config.  Trigger Tagger ADC  TDC  Cell-3  Cell-8  Comments
 3000  Sep24 13:40   5   Rotation   ok      ok    ok   ok   22537   2439   sample row

 2301  Sep23 11:11  ?    90deg, nominal height
 2306  Sep23 13:08       "
 2311  Sep23 16:11       "
 2312  Sep23 17:08       "
 2313  Sep23 18:16       "
 2314  Sep23 19:38       90deg (i.e.normal to beam)
 2315  Sep23 21:06       105deg
 2316  Sep23 21:51       119.5deg(max)
 2317  Sep23 23:08       115deg

 2318  Sep24 06:04(?!)   90deg, beam 3cm low (+3cm)
 2319  Sep24 02:12       +3cm
 2322  Sep24 04:46       +2cm
 2323  Sep24 06:46       +1cm
 2324  Sep24 09:10       -1cm
 2332  Sep24 12:42       -2cm
 2333  Sep24 14:06       -3cm (nominal, see elog#110 for details)
 2334  Sep24 15:07       -1.2cm (nominal center), trigger bit 4.

• Curr. refers to beam current.
• Configuration description options are shown below and are reflected in the Run Plan and on e-Log entry 112:
  • Commissioning
  • Rotation (platform, at 90 degrees, center of BCAL)
  • Length (platform, at 90 degrees, length scan)
  • Height (platform, at 90 degrees, up/down scan)
  • Converter (platform, at 90 degrees, center of BCAL)
  • Current (platform, at 90 degrees, beam current study)
  • Trigger (platform, at 90 degrees, trigger studies)
  • Steep (alcove, at 10-50 degrees, at lengths intercepting full depth of BCAL)
  • Leakage (alcove, at 10-25 degrees, at lengths allowing showers to leak out of end of BCAL)
• Trigger, Tagger, BCAL-ADC, BCAL-TDC columns require checking ALL the spectra in the ROOT histos.
• The Cell columns reflect the number of counts/entries in the ANDed (North AND South) cell ADC spectrum. This provide a rough indication of hits on the particular cell.