Difference between revisions of "Run Wiki"

From GlueXWiki
Jump to: navigation, search
Line 31: Line 31:
 
# '''With any issue contact On-Call Experts or RC'''
 
# '''With any issue contact On-Call Experts or RC'''
 
# Keep shift summary up to date in HDLOG. Record all that happens.
 
# Keep shift summary up to date in HDLOG. Record all that happens.
#* [https://bta.acc.jlab.org Fill out BTA] hourly.  Click "Load from EPICS" to automatically fill the left side then make sure numbers are correct. If needed edit the entry. Note: in the "Sift information" tab choose experiment <font color=blue> E12-19-003. </font>. At the end of the shift send BTA to the logbook.
+
# [https://bta.acc.jlab.org Fill out BTA] hourly.  Click "Load from EPICS" to automatically fill the left side then make sure numbers are correct. If needed edit the entry. Note: in the "Sift information" tab choose experiment <font color=blue> E12-19-003. </font>. At the end of the shift send BTA to the logbook.
#* Fill and submit the [https://halldweb.jlab.org/hdops/wiki/index.php/Shift_Checklist shift checklist] in the logbook
+
# Fill and submit the [https://halldweb.jlab.org/hdops/wiki/index.php/Shift_Checklist shift checklist] in the logbook
  
 
==Every Run: - To be updated!==
 
==Every Run: - To be updated!==

Revision as of 11:35, 28 September 2021

SRC/CT@GlueX (E12-19-003) 2021 run, November-January


General Shift Information

Run Plan November XXXX, 2021 - To be updated!

  • Take production data: XXXX nA beam on the XXXX target, XXXX configuration, XXXX trigger XXXXX.trg. Each run should last about XXX hours.


Every Shift: - To be updated!

  1. Follow the run plan as outlined by RC
  2. With any issue contact On-Call Experts or RC
  3. Keep shift summary up to date in HDLOG. Record all that happens.
  4. Fill out BTA hourly. Click "Load from EPICS" to automatically fill the left side then make sure numbers are correct. If needed edit the entry. Note: in the "Sift information" tab choose experiment E12-19-003. . At the end of the shift send BTA to the logbook.
  5. Fill and submit the shift checklist in the logbook

Every Run: - To be updated!

  1. After "Go":
  2. Update the Run Spreadsheet
  3. Check ROOTSpy and compare plots with ....


Remote Shifts

Overview

Tasks - To be updated!

  • Fill shift checklist
  • Upload plots to the Hall D logbook once per run
    •  ?????
  • Monitor beam quality
    • EPICS overview screen
      • In VNC or [XXXXXX Web Browser]
    • Strip charts
  • Monitor data quality
  • Communicate with the shift expert about issues with any of the above