Revision as of 14:38, 12 May 2012

These studies were done using halldxps1 XPS-C8 controller from Newport.

1. Configuration of the XPS Controller

1.1 Configuration of motor and stage

Building of "stages.ini" file which is located in the "CONFIG" folder of the controller.

• Connect to the XPS Controller halldxps1 using an internet browser.
• Login as Administrator.
• Select STAGE, then "Add Custom Stage" and fill all fields.

I defined Stage1 (Stage_ST55D) Stage for the stepper motor ST55D and Stage for microscope beam test as follows:

[Stage1]

SmartStageName=

Position servo loop type

CorrectorType=NoEncoderPosition

MotionDoneMode=Theoretical

Driver command interface

MotorDriverInterface=AnalogStepperPosition

ScalingCurrent=3

DisplacementPerFullStep=1

PeakCurrentPerPhase=1.3

StandbyPeakCurrentPerPhase=0.6

BaseVelocity=0.

Motor driver model

DriverName=XPS-DRV01

DriverPWMFrequency=50

DriverStepperWinding=Half

Position encoder interface

Backlash=0 CurrentVelocityCutOffFrequency=100

CurrentAccelerationCutOffFrequency=100

PositionerMappingFileName=

Limit sensors input plug

ServitudesType=StandardEORDriverPlug

MinimumTargetPosition=-10000000

MaximumTargetPosition=+10000000

HomePreset=0

MaximumVelocity=400

MaximumAcceleration=100

EmergencyDecelerationMultiplier=4

MinimumJerkTime=0.005

MaximumJerkTime=0.05

TrackingCutOffFrequency=5

Home search process

HomeSearchSequenceType=MinusEndOfRunHomeSearch

HomeSearchMaximumVelocity=250

HomeSearchMaximumAcceleration=70

HomeSearchTimeOut=600.

1.2 Configuration of system and motion groups

Building of "sistem.ini" file which is located in the "CONFIG" folder of the controller.

• Select SYSTEM, then "Manual Configuration" and define motion groups and stages on them.

I defined one MultipleAxes group - Mult1 with Stage1 stage as follows:

[GENERAL]

BootScriptFileName =

BootScriptArguments =

[GROUPS]

SingleAxisInUse =

SpindleInUse =

XYInUse =

XYZInUse =

MultipleAxesInUse = Mult1

[Mult1]

PositionerNumber = 1

PositionerInUse = P1

InitializationAndHomeSearchSequence = Together

[Mult1.P1]

PlugNumber = 1

StageName = Stage1

Time flasher filter

TimeFlasherBaseFrequency = 40e6 ; Hz

2. Testing of the XPS Controller by WEB interface

• Connect to the XPS Controller halldxps1 using an internet browser.
• Login as Administrator or User.
• Select "FRONT PANEL", then "Move".
• Select "Initialize" button for the initialization of the positioner (motion system).
• Select "Home" for homing. After initialization, any motion group must first be homed befor any motion can be executed.

After homing the Controller and the Positioner are ready. Now one can select some velocity and number of Absolute or Relative movements and push Go button. "Position" field indicates position of stage during movement.

• Using the "Jog" button under the "FRONT PANEL" I tested the jog motion, where only motion direction and speed are defined.

• The "TERMINAL" tool allows to execute all functions (more 100) of the XPS controller.

• The "STAGE - Modify" tool allows to review and modify all parameters of stage included in the stages.ini file.

• Using the "Positioner errors", "Hardware status", "Driver status" under the "FRONT PANEL" or "Error file display" under the "SYSTEM" one can check errors and statuses of the motion system.

No any problem. Everything is working.

3. Testing of Home search process

4. Testing of the XPS Controller by EPICS