Difference between revisions of "Tracking-8-12-2021"

From GlueXWiki
Jump to: navigation, search
(Agenda)
(Minutes)
Line 14: Line 14:
 
# Run preparations     
 
# Run preparations     
 
#* CDC  
 
#* CDC  
 +
#** Beni did pedestal calibration and Naomi looked at the cosmic data taken last weekend; on f125 needs to be replaced. Naomi's plugin for monitoring the trigger word in f125 will be included at least in the plot browser. The Primex experiment will start with no field and Naomi will not be able to calibrate the detector until the field is on.
 
#* FDC
 
#* FDC
#* fADC125
+
#** FDC operates at nominal HV and is stable. However, running the DAQ with the FDC is not stable, at least two f125 need to be replaced, some noise appears on several cards that is not seen with a scope in front of the f125. Sergey suspects also issues with the firmware. Need to wait till Monday when Cody is back.
 
#* GEM-TRD
 
#* GEM-TRD
 +
#** Testing setup that includes three TRDs has been install at the PS: one standard using GEMs and strip readout, another with large-pad readout, and a TRD with microMegas amplification.
 
# Tracking
 
# Tracking
 +
#*
 
# Other
 
# Other

Revision as of 17:20, 12 August 2021

  1. Instructions for Bluejeans meeting connection
  2. Meeting ID: 290664653
  3. To join via a Web Browser, go to the page [1] https://bluejeans.com/290664653.

Thu 8/12/2021 2pm

Agenda

  1. Run preparations
    • CDC
    • FDC
    • fADC125
    • GEM-TRD
  2. Tracking
  3. Other

Minutes

  1. Run preparations
    • CDC
      • Beni did pedestal calibration and Naomi looked at the cosmic data taken last weekend; on f125 needs to be replaced. Naomi's plugin for monitoring the trigger word in f125 will be included at least in the plot browser. The Primex experiment will start with no field and Naomi will not be able to calibrate the detector until the field is on.
    • FDC
      • FDC operates at nominal HV and is stable. However, running the DAQ with the FDC is not stable, at least two f125 need to be replaced, some noise appears on several cards that is not seen with a scope in front of the f125. Sergey suspects also issues with the firmware. Need to wait till Monday when Cody is back.
    • GEM-TRD
      • Testing setup that includes three TRDs has been install at the PS: one standard using GEMs and strip readout, another with large-pad readout, and a TRD with microMegas amplification.
  2. Tracking
  3. Other