Content:
c#! Run type:: PHYSICS_8 Config:: TRG_FCAL_BCAL_m8_b1bf1.conf
#! CONFIG FILE:: /home/hdops/CDAQ/daq_dev_v0.31/daq/config/hd_all/TRG_FCAL_BCAL_m8_b1bf1.conf
#! (Re)Created:: on Wed Apr 29 12:06:51 EDT 2015
#!
# DSC2_WIDTH 20 40 <- TDC width (ns), TRG width (ns)
# DSC2_THRESHOLD 20 50 <- board threshold: TDC threshold (mV), TRG threshold (mV)
#
# TS_TRIG_TYPE 1 - Internal Pulser
# 2 - External FP
# 4 - GTP
# 6 - GTP + External
#
#
# TS_FP_INPUTS - List of enabled FP inputs
#
#
# TS_SOFT_TRIG
# Trigger type (type 1 or 2 for playback)
# Number of events to trigger
# Period multiplier (depends on range 0-0x7FFF)
# Range 1 - min 120ns, increments of 30ns up to 983.13u
# 2 - min 120ns, increments of 30.72us up to 1.007s
#
#
# TI_MASTER 1 - Stand alone with master TI
#
# TI_MASTER_TRIG 1 - soft, 2 - external pulser, 3 - playback
#
# TI_SOFT_TRIG
# Trigger type (type 1 or 2 for playback)
# Number of events to trigger
# Period multiplier (depends on range 0-0x7FFF)
# Range 1 - min 120ns, increments of 30ns up to 983.13u
# 2 - min 120ns, increments of 30.72us up to 1.007s
#
# F1TDC_CLOCK 0 <- Clock Source (0 = Internal 32 MHz)
# (1 = External 31.25 MHz)
# F1TDC_VERSION 2 <- Module Version (2 = High Resolution, synchronous, 32 channels)
# (3 = Normal Resolution, synchronous, 48 channels)
# set bin size from 0.056 to 0.058 -> Beni!
# F1TDC_BIN_SIZE 0.058 <- Bin size (ns)
# F1TDC_LATENCY 3000.0 <- Trigger latency (ns)
# F1TDC_WINDOW 1000.0 <- Trigger window (ns)
==========================
TRIGGER
==========================
#CALIBRATION 1
TS_TRIG_TYPE 4
# TS_FP_INPUTS 3 9 10 12
TS_FP_INPUTS 3 9 10 12
#TS_FP_DELAY 9 24
#TS_FP_DELAY 10 50
#TS_FP_DELAY 9 27
#TS_FP_DELAY 10 53
#04/15/2016
#TS_FP_DELAY 9 23
#TS_FP_DELAY 10 44
#TS_FP_DELAY 3 427
#Cosmic test 11/11/2016
TS_FP_DELAY 9 63
TS_FP_DELAY 10 84
TS_FP_DELAY 3 500
TS_SOFT_TRIG 1 0 0x1F 1
# TS_TD_SLOTS 8 14 7
# TS_TD_SLOTS 3 4 7 8 14
# TS_TD_SLOTS 3 4 7 8 9 10 14
TS_TD_SLOTS 10 3 6 4 9 7 8 5 14
# ALL CRATES
# TS_TD_SLOTS 8 14 7
# TS_TD_SLOTS 9 3 10 8 6 5 7 14
# SSP SLOT FIBER_EN SUM_ENABLE
SSP_SLOT 8 0xFF 1
# SSP for ST
# SSP_SLOT 6 0x1 0
# TYPE DELAY INT_WIDTH ENABLE
TRIG_EQ PS 20 5 0
TRIG_EQ BCAL_E 20 20 1
TRIG_EQ BCAL_C 12 0 0
TRIG_EQ FCAL 0 10 0
TRIG_EQ ST 22 3 0
TRIG_EQ TOF 12 10 0
TRIG_EQ TAGH 96 0 0
# TYPE LATENCY WIDTH FCAL_E BCAL_E EN_THR NHIT LANE FCAL_EMIN FCAL_EMAX BCAL_EMIN BCAL_EMAX PATTERN
TRIG_TYPE BFCAL 480 5 0 1 10000 0 0
TRIG_TYPE ST 480 4 1300 1900 1100 1 -1
# TS_GTP_PRES 6 1
# TS_GTP_PRES 0 6
#TS_GTP_PRES 0 2
#TS_GTP_PRES 1 2
#TS_GTP_PRES 2 2
#TS_GTP_PRES 3 2
#TS_GTP_PRES 0 10
#TS_GTP_PRES 1 5
#TS_GTP_PRES 2 5
TRIG_DELAY 0
DAC_CALIB 0
TI_FIBER_LATENCY_OFFSET 0x98
TS_COIN_WIND 15
# TS_TRIG_HOLD 63 0
# TS_TRIG_HOLD 62 1
TS_TRIG_HOLD 1 5 1
# TS_SYNC_INT 5000
BLOCKLEVEL 1
BUFFERLEVEL 1
==========================
GLOBAL
==========================
F1TDC_BIN_SIZE 0.058
==========================
FCAL
==========================
FADC250_MODE 10
FADC250_W_OFFSET 860
FADC250_W_WIDTH 100
FADC250_NSB 1
FADC250_NSA 15
FADC250_NPEAK 3
FADC250_READ_THR 108
FADC250_NSAT 2
FADC250_TRIG_BL 100
FADC250_TRIG_THR 165
FADC250_TRIG_NSB 3
FADC250_TRIG_NSA 10
FADC250_COM_DIR /gluex/CALIB/ALL/fadc250/default
FADC250_COM_VER default
FADC250_USER_DIR /gluonfs1/gluex/CALIB/FCAL/fadc250/user/spring_2016
FADC250_USER_VER ring2_hot_v2
==========================
BCAL
==========================
FADC250_MODE 10
# Original offset, changed to 835
# FADC250_W_OFFSET 825
# FADC250_W_OFFSET 835
FADC250_W_OFFSET 860
FADC250_W_WIDTH 100
# MMD 2017-01-27
FADC250_NSB 1
FADC250_NSA 26
FADC250_NPEAK 1
FADC250_READ_THR 105
FADC250_NSAT 2
FADC250_TRIG_BL 100
FADC250_TRIG_THR 120
FADC250_TRIG_NSB 3
FADC250_TRIG_NSA 19
FADC250_COM_DIR /gluex/CALIB/ALL/fadc250/default
FADC250_COM_VER default
FADC250_USER_DIR /gluex/CALIB/ALL/user
FADC250_USER_VER
# F1 TDC
#change latency from 900. to 3540. and window from 500 to 1000 ->Beni
F1TDC_WINDOW 1000.
F1TDC_LATENCY 3540.
# set bin size from 0.056 to 0.058 -> Beni!
F1TDC_CLOCK 1
# LE discriminator
DSC2_WIDTH 20 40
DSC2_THRESHOLD 35 50
DSC2_COM_DIR /gluex/CALIB/ALL/dsc/default
DSC2_COM_VER default
==========================
TOF
==========================
FADC250_MODE 10
FADC250_W_OFFSET 810
FADC250_W_WIDTH 100
FADC250_NSB 1
FADC250_NSA 25
FADC250_NPEAK 3
FADC250_READ_THR 110
FADC250_TRIG_BL 100
FADC250_TRIG_THR 110
FADC250_TRIG_NSB 3
FADC250_TRIG_NSA 15
FADC250_COM_DIR /gluex/CALIB/ALL/fadc250/default
FADC250_COM_VER default
FADC250_USER_DIR /home/
FADC250_USER_VER
# LE discriminator
DSC2_WIDTH 20 10
DSC2_THRESHOLD -12 -12
# CAEN 1290
#TDC1290_W_WIDTH 750
TDC1290_W_WIDTH 3800
#TDC1290_W_OFFSET -1750
#TDC1290_W_OFFSET -3640
TDC1290_W_OFFSET -3660
TDC1290_W_EXTRA 25
TDC1290_W_REJECT 50
TDC1290_BLT_EVENTS 1
TDC1290_N_HITS 64
TDC1290_ALMOSTFULL 16384
TDC1290_OUT_PROG 2
TDC1290_A24_A32 2
TDC1290_SNGL_BLT 3
TDC1290_SST_RATE 0
TDC1290_BERR_FIFO 1
TDC1290_EDGE 2
# TDC1290_RC SLOT CHIP TAP1 TAP2 TAP3 TAP4
TDC1290_RC 3 0 5 1 4 3
TDC1290_RC 3 1 5 5 1 3
TDC1290_RC 3 2 7 2 7 4
TDC1290_RC 3 3 2 2 7 7
TDC1290_RC 4 0 0 1 6 3
TDC1290_RC 4 1 0 6 1 4
TDC1290_RC 4 2 3 2 0 3
TDC1290_RC 4 3 1 1 5 7
TDC1290_RC 5 0 6 0 1 6
TDC1290_RC 5 1 5 4 1 6
TDC1290_RC 5 2 2 1 2 3
TDC1290_RC 5 3 3 1 7 5
TDC1290_RC 6 0 1 4 6 6
TDC1290_RC 6 1 2 5 0 6
TDC1290_RC 6 2 7 0 7 5
TDC1290_RC 6 3 5 7 1 3
TDC1290_RC 7 0 3 1 6 6
TDC1290_RC 7 1 3 0 3 3
TDC1290_RC 7 2 7 4 1 3
TDC1290_RC 7 3 0 2 7 7
TDC1290_RC 8 0 7 7 0 4
TDC1290_RC 8 1 5 1 7 7
TDC1290_RC 8 2 3 0 4 2
TDC1290_RC 8 3 0 0 0 4
==========================
ST
==========================
#change latency to 925 by BENI
# also change NSA and NSB from 3/6 to 5/20
FADC250_MODE 10
# FADC250_W_OFFSET 824
FADC250_W_OFFSET 860
FADC250_W_WIDTH 100
FADC250_NSB 5
FADC250_NSA 20
FADC250_NPEAK 3
# change FADC250_READ_THR from 800 -> 110 by pooser (5 mV)
# change FADC250_READ_THR from 110 -> 120 by pooser (10 mV)
FADC250_READ_THR 120
FADC250_TRIG_BL 100
FADC250_TRIG_THR 300
FADC250_TRIG_NSB 3
FADC250_TRIG_NSA 15
FADC250_COM_DIR /gluex/CALIB/ALL/fadc250/default
FADC250_COM_VER default
FADC250_USER_DIR /home/
FADC250_USER_VER
# F1 TDC
# change latency from 2100 to 3700
F1TDC_WINDOW 1000.
F1TDC_LATENCY 3460.
F1TDC_CLOCK 1
# LE discriminator
# change DSC2_THRESHOLD from 100 -> 50 by pooser
DSC2_WIDTH 20 40
DSC2_THRESHOLD 50 60
==========================
TAGH
==========================
FADC250_MODE 10
FADC250_W_OFFSET 915
FADC250_W_WIDTH 100
FADC250_NSB 3
FADC250_NSA 6
FADC250_NPEAK 3
# changed from 120 to 300
FADC250_READ_THR 300
FADC250_TRIG_BL 100
FADC250_TRIG_THR 300
FADC250_TRIG_NSB 3
FADC250_TRIG_NSA 6
FADC250_COM_DIR /gluex/CALIB/ALL/fadc250/default
FADC250_COM_VER default
FADC250_USER_DIR /home/
FADC250_USER_VER
CTP_USE 0
# F1 TDC
F1TDC_WINDOW 600.
F1TDC_LATENCY 3700.
F1TDC_CLOCK 1
# LE discriminator
DSC2_WIDTH 20 40
DSC2_THRESHOLD 45 45
==========================
TAGM
==========================
FADC250_MODE 10
#FADC250_W_OFFSET 895
FADC250_W_OFFSET 915
FADC250_W_WIDTH 100
FADC250_NSB 3
FADC250_NSA 6
FADC250_NPEAK 3
# For low gain mode
#FADC250_READ_THR 115 #(early spring 2016)
#FADC250_READ_THR 250 # 4/9/16 aeb
# For high gain mode
#FADC250_READ_THR 180 #(change 3/30/2016 by RTJ)
FADC250_READ_THR 111
#FADC250_READ_THR 200 # (new defaults 4/21/16 by AEB)
FADC250_TRIG_BL 100
#FADC250_TRIG_THR 210
FADC250_TRIG_THR 400 # (new defaults 4/21/16 by AEB)
FADC250_TRIG_NSB 3
FADC250_TRIG_NSA 15
FADC250_COM_DIR /gluex/CALIB/ALL/fadc250/default
FADC250_COM_VER default
#FADC250_USER_DIR /gluex/Subsystems/TAGM/calib
#FADC250_USER_VER test_v1
#FADC250_USER_DIR /home/
#FADC250_USER_VER
CTP_USE 0
# F1 TDC
F1TDC_WINDOW 600.
F1TDC_LATENCY 3700.
F1TDC_CLOCK 1
# LE discriminator
# Change for high gain mode
DSC2_WIDTH 20 40
#DSC2_THRESHOLD 20 20 (changed 2/10/16 by A.B.)
#DSC2_THRESHOLD 5 5 (changed for diamond alignment 2/20/16)
#DSC2_THRESHOLD 12 12
#DSC2_THRESHOLD 100 150 #(changed 3/30/2016 by RTJ)
DSC2_THRESHOLD 80 80 #(changed 4/21/2016 by aeb)
==========================
PS
==========================
FADC250_MODE 10
FADC250_W_OFFSET 880
FADC250_W_WIDTH 100
FADC250_NSB 3
FADC250_NSA 10
FADC250_NPEAK 3
FADC250_READ_THR 130
FADC250_TRIG_BL 100
FADC250_TRIG_THR 200
FADC250_TRIG_NSB 3
FADC250_TRIG_NSA 15
FADC250_COM_DIR /gluex/CALIB/ALL/fadc250/default
FADC250_COM_VER default
FADC250_USER_DIR /home/somov/conf/cosmic
FADC250_USER_VER
==========================
PSC
==========================
FADC250_MODE 10
FADC250_W_OFFSET 880
FADC250_W_WIDTH 100
FADC250_NSB 3
FADC250_NSA 6
FADC250_NPEAK 3
FADC250_READ_THR 150
FADC250_TRIG_BL 100
FADC250_TRIG_THR 150
FADC250_TRIG_NSB 3
FADC250_TRIG_NSA 6
# F1 TDC
F1TDC_WINDOW 600
F1TDC_LATENCY 3660
F1TDC_CLOCK 1
# LE discriminator
DSC2_WIDTH 20 40
DSC2_THRESHOLD 40 40
==========================
TPOL
==========================
FADC250_MODE 10
FADC250_W_OFFSET 825
FADC250_W_WIDTH 150
FADC250_NSB 3
FADC250_NSA 10
FADC250_NPEAK 1
FADC250_READ_THR 133
FADC250_TRIG_BL 100
FADC250_TRIG_THR 500
FADC250_TRIG_NSB 3
FADC250_TRIG_NSA 6
==========================
CDC
==========================
# CDC_short 3
# CDC_long 6
# FDC_short 4
# FDC_amp_short 5
# FDC_sum_long 7
# FDC_amp_long 8
FADC125_MODE 6
# FADC125_W_OFFSET 425
# FADC125_W_OFFSET 415
FADC125_W_OFFSET 438
FADC125_W_WIDTH 200
# Changed by Naomi from 200 to 10 on 1/12/18
FADC125_IE 10
FADC125_NPEAK 1
FADC125_PG 4
FADC125_P1 4
FADC125_P2 4
FADC125_IBIT 4
FADC125_ABIT 3
FADC125_PBIT 0
FADC125_TH 60
FADC125_TL 15
FADC125_THR 500
FADC125_DAC 800
# FADC125_COM_DIR /gluex/CALIB/ALL/fadc125/default
# FADC125_COM_VER default
# FADC125_COM_DIR /gluex/CALIB/ALL/fadc125/fall2017
# FADC125_COM_VER fall2017
# New calibration from Beni 11/22/2017
# FADC125_COM_DIR /gluex/CALIB/ALL/fadc125/fall2017
# FADC125_COM_VER fall2017C
# New calibration from Beni 11/22/2017 Naomi's thresholds 12/18/2017
# FADC125_COM_DIR /gluex/CALIB/ALL/fadc125/fall2017
# FADC125_COM_VER fall2017D
# New thresholds from Naomi 1/12/2018
# FADC125_COM_DIR /gluex/CALIB/ALL/fadc125/fall2017
# FADC125_COM_VER spring2018_A
# New thresholds from Naomi 2/2/2018
FADC125_COM_DIR /gluex/CALIB/ALL/fadc125/fall2017
FADC125_COM_VER spring2018_B
FADC125_USER_DIR /gluex/
FADC125_USER_VER
==========================
FDC
==========================
# CDC_short 3
# CDC_long 6
# FDC_short 4
# FDC_amp_short 5
# FDC_sum_long 7
# FDC_amp_long 8
FADC125_MODE 8
# FADC125_W_OFFSET 425
# FADC125_W_OFFSET 411
FADC125_W_OFFSET 434
FADC125_W_WIDTH 80
FADC125_IE 16
FADC125_NPEAK 1
FADC125_PG 4
FADC125_P1 4
FADC125_P2 4
FADC125_IBIT 4
FADC125_ABIT 0
FADC125_PBIT 0
FADC125_TH 40
FADC125_TL 10
FADC125_THR 70
FADC125_DAC 800
# FADC125_COM_DIR /gluex/CALIB/ALL/fadc125/fall2017
# FADC125_COM_VER fall2017
# New calibration from Beni 11/22/2017
FADC125_COM_DIR /gluex/CALIB/ALL/fadc125/fall2017
FADC125_COM_VER fall2017B
FADC125_USER_DIR /gluex/
FADC125_USER_VER
# F1 TDC
# change latency and window back to what we expect from ADCs (Beni)
F1TDC_WINDOW 1400.
F1TDC_LATENCY 3560.
#F1TDC_BIN_SIZE 0.112
# High-resolution board in slot 17
# changed by Beni (loser) 2014.10.6
F1TDC_HR_WINDOW 1000.
F1TDC_HR_LATENCY 1160.
# set bin size from 0.056 to 0.058 -> Beni!
#F1TDC_HR_BIN_SIZE 0.058
F1TDC_CLOCK 1