Content:
#
# DSC2_WIDTH 20 40 <- TDC width (ns), TRG width (ns)
# DSC2_THRESHOLD 20 50 <- board threshold: TDC threshold (mV), TRG threshold (mV)
#
# TS_TRIG_TYPE 1 - Internal Pulser
# 2 - External FP
# 4 - GTP
# 6 - GTP + External
#
#
# TS_FP_INPUTS - List of enabled FP inputs
#
#
# TS_SOFT_TRIG
# Trigger type (type 1 or 2 for playback)
# Number of events to trigger
# Period multiplier (depends on range 0-0x7FFF)
# Range 1 - min 120ns, increments of 30ns up to 983.13u
# 2 - min 120ns, increments of 30.72us up to 1.007s
#
#
# TI_MASTER 1 - Stand alone with master TI
#
# TI_MASTER_TRIG 1 - soft, 2 - external pulser, 3 - playback
#
# TI_SOFT_TRIG
# Trigger type (type 1 or 2 for playback)
# Number of events to trigger
# Period multiplier (depends on range 0-0x7FFF)
# Range 1 - min 120ns, increments of 30ns up to 983.13u
# 2 - min 120ns, increments of 30.72us up to 1.007s
#
# F1TDC_CLOCK 0 <- Clock Source (0 = Internal 32 MHz)
# (1 = External 31.25 MHz)
# F1TDC_VERSION 2 <- Module Version (2 = High Resolution, synchronous, 32 channels)
# (3 = Normal Resolution, synchronous, 48 channels)
# set bin size from 0.056 to 0.058 -> Beni!
# F1TDC_BIN_SIZE 0.058 <- Bin size (ns)
# F1TDC_LATENCY 3000.0 <- Trigger latency (ns)
# F1TDC_WINDOW 1000.0 <- Trigger window (ns)
==========================
TRIGGER
==========================
#CALIBRATION 1
USE_PLAYBACK 0
TS_TRIG_TYPE 4
#TS_FP_INPUTS 11 12
TS_SOFT_TRIG 1 64000 0x1FF 1
TS_TD_SLOTS 3 9 14
# SSP SLOT FIBER_EN SUM_ENABLE
SSP_SLOT 5 0x02 0
SSP_SLOT 9 0x8 1
SSP_SLOT 10 0 1
# TYPE DELAY INT_WIDTH ENABLE
TRIG_EQ PS 35 10 1
TRIG_EQ BCAL_E 20 20 0
TRIG_EQ BCAL_C 20 0 0
TRIG_EQ FCAL 8 15 1
TRIG_EQ ST 20 10 0
TRIG_EQ TOF 20 10 0
# TYPE LATENCY WIDTH FCAL_E BCAL_E EN_THR NHIT LANE
TRIG_TYPE PS 440 5 1300 1900 1100 0 0
TRIG_TYPE BFCAL 440 20 5 1 10000 0 -1
TRIG_TYPE BFCAL 440 20 6 1 12000 0 -1
TRIG_TYPE BFCAL 440 20 40 1 64000 0 -1
TRIG_TYPE BFCAL 440 5 10 3 18000 0 -1
TRIG_TYPE BFCAL 440 20 4 1 6000 0 -1
TRIG_TYPE BFCAL 440 5 1 0 1800 0 -1
TRIG_TYPE BFCAL 440 5 0 1 6000 0 -1
TRIG_TYPE BCAL_COS 440 40 1500 2100 1300 0 -1
TRIG_TYPE BFCAL 440 5 1 0 150 0 1
#TS_GTP_PRES 0 2
# Tune TAC
# TS_GTP_PRES 1 5
# CHECK
# TS_GTP_PRES 1 8
# TS_GTP_PRES 1 0
# 1/31/2018 decrease prescaling by a factor of 2
TS_GTP_PRES 1 7
# 4/5/2018 TEST
# TS_GTP_PRES 1 4
#TS_GTP_PRES 2 2
#TS_GTP_PRES 3 2
#TS_GTP_PRES 0 10
#TS_GTP_PRES 1 5
#TS_GTP_PRES 2 5
TRIG_DELAY 0
DAC_CALIB 0
TI_FIBER_LATENCY_OFFSET 0x98
TS_COIN_WIND 10
# TEST 2, THR = 3
TS_TRIG_HOLD 1 10 0
TS_TRIG_HOLD 2 127 0
TS_TRIG_HOLD 4 40 0
TS_TRIG_HOLD 3 2 1
TI_MASTER 0
TI_MASTER_TRIG 1
TI_FP_INPUTS 3
# TI_SOFT_TRIG 1 10000 0x7FFF 1
TI_SOFT_TRIG 1 10000 0x600 1
BLOCKLEVEL 40
BUFFERLEVEL 4
==========================
GLOBAL
==========================
F1TDC_BIN_SIZE 0.058
==========================
TAGH
==========================
FADC250_MODE 9
#FADC250_W_OFFSET 895
FADC250_W_OFFSET 905
FADC250_W_WIDTH 100
FADC250_NSB 3
FADC250_NSA 6
FADC250_NPEAK 3
# changed from 120 to 300
FADC250_READ_THR 300
#FADC250_READ_THR 10
FADC250_TRIG_BL 100
FADC250_TRIG_THR 200
FADC250_TRIG_NSB 3
FADC250_TRIG_NSA 15
#FADC250_COM_DIR /home/somov/setups/tagh/parms/common/fadc250
#FADC250_COM_VER dac3200
FADC250_COM_DIR /gluex/CALIB/ALL/fadc250/default
FADC250_COM_VER default
FADC250_USER_DIR /home/
FADC250_USER_VER
CTP_USE 0
# F1 TDC
F1TDC_WINDOW 600.
F1TDC_LATENCY 3600.
F1TDC_CLOCK 1
# LE discriminator
DSC2_WIDTH 40 40
DSC2_THRESHOLD 45 45
==========================
TAGM
==========================
FADC250_MODE 9
#FADC250_W_OFFSET 895
FADC250_W_OFFSET 905
FADC250_W_WIDTH 100
FADC250_NSB 3
FADC250_NSA 6
FADC250_NPEAK 3
# For low gain mode
FADC250_READ_THR 150
# For high gain mode
# FADC250_READ_THR 180
# FADC250_READ_THR 10
FADC250_TRIG_BL 100
FADC250_TRIG_THR 210
FADC250_TRIG_NSB 3
FADC250_TRIG_NSA 15
# FADC250_COM_DIR /home/somov/setups/tagh/parms/common/fadc250
# FADC250_COM_VER dac3300
FADC250_COM_DIR /gluex/CALIB/ALL/fadc250/default
FADC250_COM_VER default
# FADC250_USER_DIR /gluex/CALIB/TAGM/fadc250/user/spring_2017
# FADC250_USER_VER spring_2017_v2
FADC250_USER_DIR /gluex/CALIB/TAGM/fadc250/user/spring_2018
FADC250_USER_VER spring_2018_v1
CTP_USE 0
# F1 TDC
F1TDC_WINDOW 600.
F1TDC_LATENCY 3600.
F1TDC_CLOCK 1
# LE discriminator
# Change for high gain mode
DSC2_WIDTH 20 40
# Changed from 20 to 5 Alex B.
# DSC2_THRESHOLD 5 5
DSC2_THRESHOLD 12 12
# DSC2_COM_DIR /gluex/CALIB/ALL/dsc/default
# DSC2_COM_VER spring_2017_v2
# New thresholds from Richard, 1/17/2018
DSC2_COM_DIR /gluex/CALIB/ALL/dsc/spring-2018
DSC2_COM_VER spring_2018_v1
==========================
PS
==========================
FADC250_MODE 9
FADC250_W_OFFSET 850
FADC250_W_WIDTH 100
FADC250_NSB 3
FADC250_NSA 10
FADC250_NPEAK 3
FADC250_READ_THR 130
#FADC250_READ_THR 10
FADC250_TRIG_BL 100
FADC250_TRIG_THR 200
FADC250_TRIG_NSB 3
FADC250_TRIG_NSA 15
# FADC250_COM_DIR /home/somov/setups/tagh/parms/common/fadc250
# FADC250_COM_VER fall_dac3300
FADC250_COM_DIR /gluex/CALIB/ALL/fadc250/default
FADC250_COM_VER default
FADC250_USER_DIR /home/somov/conf/cosmic
FADC250_USER_VER
==========================
PSC
==========================
FADC250_MODE 9
FADC250_W_OFFSET 850
FADC250_W_WIDTH 100
FADC250_NSB 3
FADC250_NSA 6
FADC250_NPEAK 3
FADC250_READ_THR 150
#FADC250_READ_THR 10
FADC250_TRIG_BL 100
FADC250_TRIG_THR 150
FADC250_TRIG_NSB 3
FADC250_TRIG_NSA 7
# F1 TDC
F1TDC_WINDOW 600
F1TDC_LATENCY 3540
F1TDC_CLOCK 1
USE_CTP 0
# LE discriminator
DSC2_WIDTH 40 40
DSC2_THRESHOLD 40 40
==========================
TPOL
==========================
FADC250_MODE 10
FADC250_W_OFFSET 830
# FADC250_W_OFFSET 920
FADC250_W_WIDTH 50
FADC250_NSB 3
FADC250_NSA 6
FADC250_NPEAK 1
FADC250_READ_THR 2000
FADC250_TRIG_BL 100
FADC250_TRIG_THR 1000
FADC250_TRIG_NSB 3
FADC250_TRIG_NSA 6
==========================
TABS
==========================
FADC250_MODE 10
FADC250_W_OFFSET 800
FADC250_W_WIDTH 100
FADC250_NSB 3
FADC250_NSA 10
FADC250_NPEAK 3
FADC250_READ_THR 120
FADC250_TRIG_BL 100
# FADC250_TRIG_THR 120
# Production
# FADC250_TRIG_THR 350
# 4/11/2018
FADC250_TRIG_THR 300
FADC250_TRIG_NSB 3
# FADC250_TRIG_NSA 15
# 4/11/2018
FADC250_TRIG_NSA 9
FADC250_COM_DIR /gluex/CALIB/ALL/fadc250/default
FADC250_COM_VER tac
FADC250_USER_DIR
FADC250_USER_VER
# LE discriminator
DSC2_WIDTH 40 40
#DSC2_THRESHOLD 20 20
DSC2_THRESHOLD 40 40
# CAEN 1290
TDC1290_W_WIDTH 3000
TDC1290_W_OFFSET -3500
TDC1290_W_EXTRA 25
TDC1290_W_REJECT 50
TDC1290_BLT_EVENTS 1
TDC1290_N_HITS 64
TDC1290_ALMOSTFULL 16384
TDC1290_OUT_PROG 2
TDC1290_A24_A32 2
TDC1290_SNGL_BLT 3
TDC1290_SST_RATE 0
TDC1290_BERR_FIFO 1
TDC1290_EDGE 2