Content:
#! Run type:: PHYSICS_8 Config:: TRG_FCAL_BCAL_m8_b1bf1.conf
#! CONFIG FILE:: /home/hdops/CDAQ/daq_dev_v0.31/daq/config/hd_all/TRG_FCAL_BCAL_m8_b1bf1.conf
#! (Re)Created:: on Wed Apr 29 12:06:51 EDT 2015
#!
# DSC2_WIDTH 20 40 <- TDC width (ns), TRG width (ns)
# DSC2_THRESHOLD 20 50 <- board threshold: TDC threshold (mV), TRG threshold (mV)
#
# TS_TRIG_TYPE 1 - Internal Pulser
# 2 - External FP
# 4 - GTP
# 6 - GTP + External
#
#
# TS_FP_INPUTS - List of enabled FP inputs
#
#
# TS_SOFT_TRIG
# Trigger type (type 1 or 2 for playback)
# Number of events to trigger
# Period multiplier (depends on range 0-0x7FFF)
# Range 1 - min 120ns, increments of 30ns up to 983.13u
# 2 - min 120ns, increments of 30.72us up to 1.007s
#
#
# TI_MASTER 1 - Stand alone with master TI
#
# TI_MASTER_TRIG 1 - soft, 2 - external pulser, 3 - playback
#
# TI_SOFT_TRIG
# Trigger type (type 1 or 2 for playback)
# Number of events to trigger
# Period multiplier (depends on range 0-0x7FFF)
# Range 1 - min 120ns, increments of 30ns up to 983.13u
# 2 - min 120ns, increments of 30.72us up to 1.007s
#
# F1TDC_CLOCK 0 <- Clock Source (0 = Internal 32 MHz)
# (1 = External 31.25 MHz)
# F1TDC_VERSION 2 <- Module Version (2 = High Resolution, synchronous, 32 channels)
# (3 = Normal Resolution, synchronous, 48 channels)
# set bin size from 0.056 to 0.058 -> Beni!
# F1TDC_BIN_SIZE 0.058 <- Bin size (ns)
# F1TDC_LATENCY 3000.0 <- Trigger latency (ns)
# F1TDC_WINDOW 1000.0 <- Trigger window (ns)
==========================
TRIGGER
==========================
USE_PLAYBACK 0
TS_TRIG_TYPE 6
TS_SOFT_TRIG 2 65535 0x1F 1
TS_FP_INPUTS 3 5 6 9 10 12
TS_FP_DELAY 3 427
TS_FP_DELAY 5 417
TS_FP_DELAY 6 370
TS_FP_DELAY 9 23
TS_FP_DELAY 10 21
TS_TD_SLOTS 10 3 9 7 8 15 14
# SSP SLOT FIBER_EN SUM_ENABLE
SSP_SLOT 14 0x1 1
#FCAL
SSP_SLOT 9 0x3F 1
SSP_SLOT 10 0x3F 1
#PS
SSP_SLOT 5 0x02 0
# TYPE DELAY INT_WIDTH ENABLE
# Spring 2017 initial
TRIG_EQ PS 35 10 1
TRIG_EQ BCAL_E 12 20 0
TRIG_EQ BCAL_C 20 0 0
TRIG_EQ FCAL 8 10 1
TRIG_EQ ST 31 3 0
TRIG_EQ TOF 20 10 0
TRIG_EQ CCAL 4 15 1
# Change ST time to from 30 to 31 and TAGH delay from 105 to 106
TRIG_EQ TAGH 106 0 0
# TYPE LATENCY WIDTH FCAL_E BCAL_E EN_THR NHIT LANE FCAL_EMIN FCAL_EMAX BCAL_EMIN BCAL_EMAX PATTERN
#TRIG_TYPE CFCAL 440 5 4 9 29000 0 0 0 65535 0 65535
# 02/26/2019
TRIG_TYPE CFCAL 440 5 4 9 43000 0 0 0 65535 0 65535
TRIG_TYPE PS 440 5 1300 1900 1100 0 3
# TS_GTP_PRES 0 11
TRIG_DELAY 0
DAC_CALIB 0
TI_FIBER_LATENCY_OFFSET 0x98
TS_COIN_WIND 15
# TEST 2, THR = 3
TS_TRIG_HOLD 1 10 0
TS_TRIG_HOLD 2 127 0
TS_TRIG_HOLD 4 40 0
TS_TRIG_HOLD 3 2 1
# TS_SYNC_INT 1000
# 2/7/16 changed to 5000
TS_SYNC_INT 5000
BLOCKLEVEL 40
BUFFERLEVEL 4
==========================
GLOBAL
==========================
F1TDC_BIN_SIZE 0.058
FADC250_BUSY 3
FADC125_BUSY 3
FADC250_FORMAT 2
FADC125_FORMAT 1
==========================
FCAL
==========================
FADC250_MODE 9
# FADC250_W_OFFSET 820
# Changed from 820 to 805 (12/15/16)
FADC250_W_OFFSET 805
#FADC250_W_WIDTH 100
# Changed from 100 to 70 (12/17/2016)
FADC250_W_WIDTH 100
FADC250_NSB 1
FADC250_NSA 15
FADC250_NPEAK 3
FADC250_NSAT 2
FADC250_READ_THR 108
FADC250_TRIG_BL 100
FADC250_TRIG_THR 165
FADC250_TRIG_NSB 3
FADC250_TRIG_NSA 10
FADC250_COM_DIR /gluex/CALIB/ALL/fadc250/default
FADC250_COM_VER default
# FADC250_USER_DIR /gluonfs1/gluex/CALIB/FCAL/fadc250/user/spring_2016
# FADC250_USER_VER ring4_hot_v1
# FADC250_USER_DIR /gluonfs1/gluex/CALIB/FCAL/fadc250/user/spring_2016
# FADC250_USER_VER ring3_hot_v1
# FADC250_USER_DIR /gluonfs1/gluex/CALIB/FCAL/fadc250/user/spring_2016
# FADC250_USER_VER ring2_hot_v1
# Used in the begining of production in spring 2017
# FADC250_USER_DIR /gluonfs1/gluex/CALIB/FCAL/fadc250/user/spring_2016
# FADC250_USER_VER ring2_hot_v2
# FADC250_USER_DIR /gluonfs1/gluex/CALIB/FCAL/fadc250/user/spring_2016
# FADC250_USER_VER ring1_hot_v1
# FADC250_USER_DIR /gluonfs1/gluex/CALIB/FCAL/fadc250/user/spring_2016
# FADC250_USER_VER ring_hot_v1
# Latest from spring 2017
# FADC250_USER_DIR /gluonfs1/gluex/CALIB/FCAL/fadc250/user/spring_2017
# FADC250_USER_VER ring2_hot_v2
# FADC250_USER_DIR /gluonfs1/gluex/CALIB/FCAL/fadc250/user/spring_2018
# FADC250_USER_VER ring2_hot_v1
# Changed by Alex on 1/24/18
# FADC250_USER_DIR /gluonfs1/gluex/CALIB/FCAL/fadc250/user/spring_2018
# FADC250_USER_VER ring2_hot_v2
# Alex Test
# FADC250_USER_DIR /gluonfs1/gluex/CALIB/FCAL/fadc250/user/fall_2018
# FADC250_USER_VER ring2_hot_v1
# Changed by Alex on 4/7/18
# FADC250_USER_DIR /gluonfs1/gluex/CALIB/FCAL/fadc250/user/spring_2018
# FADC250_USER_VER ring2_hot_v3
# Changed by Alex on 4/7/18
FADC250_USER_DIR /gluonfs1/gluex/CALIB/FCAL/fadc250/user/ccal_2018
FADC250_USER_VER hot_v3
==========================
CCAL
==========================
FADC250_MODE 9
FADC250_W_OFFSET 805
#FADC250_W_OFFSET 900
FADC250_W_WIDTH 100
FADC250_NSB 1
FADC250_NSA 15
FADC250_NPEAK 3
FADC250_NSAT 2
FADC250_READ_THR 108
FADC250_TRIG_BL 100
#FADC250_TRIG_THR 200 Originally used for CCAL
FADC250_TRIG_THR 130
# Test Rate A.S
# FADC250_TRIG_THR 110
FADC250_TRIG_NSB 3
FADC250_TRIG_NSA 10
FADC250_COM_DIR /gluex/CALIB/ALL/fadc250/default
FADC250_COM_VER default
FADC250_USER_DIR /gluonfs1/gluex/CALIB/FCAL/fadc250/user/spring_2018
FADC250_USER_VER
# Configuration of CCAL reference PMTs
FADC250_MODE_REF 10
FADC250_W_OFFSET_REF 805
FADC250_W_WIDTH_REF 100
FADC250_READ_THR_REF 150
==========================
BCAL
==========================
# change offset from 905 to 885 -> Beni 6.10.2014 afternoon
# also change NSB and NSA from 3/6 to 5/40
FADC250_MODE 9
# Changed from 825 to 820 (2/26/15)
# FADC250_W_OFFSET 820
# Changed from 820 to 815 (12/15/16)
FADC250_W_OFFSET 815
# MMD 2017-01-27
FADC250_W_WIDTH 100
FADC250_NSB 1
FADC250_NSA 26
FADC250_NPEAK 1
FADC250_NSAT 2
# MMD threshold from 110 to 105 (2014-12-05)
FADC250_READ_THR 105
FADC250_TRIG_BL 100
FADC250_TRIG_THR 120
FADC250_TRIG_NSB 3
FADC250_TRIG_NSA 19
FADC250_COM_DIR /gluex/CALIB/ALL/fadc250/default
FADC250_COM_VER default
FADC250_USER_DIR /gluex/CALIB/ALL/user
FADC250_USER_VER
# F1 TDC
#change latency from 900. to 3540. and window from 500 to 1000 ->Beni
# F1TDC_WINDOW 1000.
# Changed from 1000 to 400 (12/17/2016)
F1TDC_WINDOW 400.
F1TDC_LATENCY 3400.
# set bin size from 0.056 to 0.058 -> Beni!
F1TDC_CLOCK 1
# LE discriminator
DSC2_WIDTH 20 40
DSC2_THRESHOLD 35 50
DSC2_COM_DIR /gluex/CALIB/ALL/dsc/default
DSC2_COM_VER default
==========================
TOF
==========================
# change latency and width from 510/200 to 910/100
# and change NSB and NSA from 3/6 to 5/20
# btw. it is BENI
# changed NSB & NSA from 5/20 to 10/45 (eugenio)
FADC250_MODE 9
# FADC250_W_OFFSET 810
# Changed from 820 to 815 (12/15/16)
FADC250_W_OFFSET 800
# FADC250_W_WIDTH 100
# Changed from 100 to 70 (12/17/2016)
# Changed from 70 to 80 (02/01/2017)
FADC250_W_WIDTH 100
FADC250_NSB 1
FADC250_NSA 10
FADC250_NPEAK 3
FADC250_NSAT 2
FADC250_READ_THR 160
FADC250_TRIG_BL 100
FADC250_TRIG_THR 110
FADC250_TRIG_NSB 3
FADC250_TRIG_NSA 15
FADC250_COM_DIR /gluex/CALIB/ALL/fadc250/default
FADC250_COM_VER default
FADC250_USER_DIR /home/
FADC250_USER_VER
# CTP_BCAL_THR 56000
# LE discriminator
DSC2_WIDTH 20 40
# Default
DSC2_THRESHOLD -12 -12
DSC2_COM_DIR /gluex/CALIB/ALL/dsc/default
DSC2_COM_VER default
# CAEN 1290
#TDC1290_W_WIDTH 750
#TDC1290_W_WIDTH 3800
# Changed from 3800 to 1000 (12/17/2016)
# Changed from 1000 to 800 (02/01/2017)
TDC1290_W_WIDTH 800
#TDC1290_W_OFFSET -1750
#TDC1290_W_OFFSET -3640
TDC1290_W_OFFSET -3660
TDC1290_W_EXTRA 25
TDC1290_W_REJECT 50
TDC1290_BLT_EVENTS 1
TDC1290_N_HITS 64
TDC1290_ALMOSTFULL 16384
TDC1290_OUT_PROG 2
TDC1290_A24_A32 2
TDC1290_SNGL_BLT 3
TDC1290_SST_RATE 0
TDC1290_BERR_FIFO 1
TDC1290_EDGE 2
TDC1290_INL 1
# TDC1290_RC SLOT CHIP TAP1 TAP2 TAP3 TAP4
TDC1290_RC 3 0 5 1 4 3
TDC1290_RC 3 1 5 5 1 3
TDC1290_RC 3 2 7 2 7 4
TDC1290_RC 3 3 2 2 7 7
TDC1290_RC 4 0 0 1 6 3
TDC1290_RC 4 1 0 6 1 4
TDC1290_RC 4 2 3 2 0 3
TDC1290_RC 4 3 1 1 5 7
TDC1290_RC 5 0 6 0 1 6
TDC1290_RC 5 1 5 4 1 6
TDC1290_RC 5 2 2 1 2 3
TDC1290_RC 5 3 3 1 7 5
TDC1290_RC 6 0 1 4 6 6
TDC1290_RC 6 1 2 5 0 6
TDC1290_RC 6 2 7 0 7 5
TDC1290_RC 6 3 5 7 1 3
TDC1290_RC 7 0 3 1 6 6
TDC1290_RC 7 1 3 0 3 3
TDC1290_RC 7 2 7 4 1 3
TDC1290_RC 7 3 0 2 7 7
TDC1290_RC 8 0 7 7 0 4
TDC1290_RC 8 1 5 1 7 7
TDC1290_RC 8 2 3 0 4 2
TDC1290_RC 8 3 0 0 0 4
==========================
ST
==========================
#change latency to 925 by BENI
# also change NSA and NSB from 3/6 to 5/20
FADC250_MODE 9
#FADC250_W_OFFSET 824
# Changed from 824 to 819 (12/15/16)
FADC250_W_OFFSET 819
#FADC250_W_WIDTH 100
# Changed from 100 to 80 (12/17/2016)
FADC250_W_WIDTH 100
FADC250_NSB 5
FADC250_NSA 20
FADC250_NPEAK 3
FADC250_NSAT 2
# change FADC250_READ_THR from 800 -> 110 by pooser (5 mV)
# change FADC250_READ_THR from 110 -> 120 by pooser (10 mV)
FADC250_READ_THR 120
FADC250_TRIG_BL 100
FADC250_TRIG_THR 300
FADC250_TRIG_NSB 3
FADC250_TRIG_NSA 15
FADC250_COM_DIR /gluex/CALIB/ALL/fadc250/default
FADC250_COM_VER default
FADC250_USER_DIR /home/
FADC250_USER_VER
# F1 TDC
# change latency from 2100 to 3700
# F1TDC_WINDOW 1000.
# Changed from 1000 to 600 (12/17/2016)
F1TDC_WINDOW 600.
F1TDC_LATENCY 3460.
F1TDC_CLOCK 1
# LE discriminator
# change DSC2_THRESHOLD from 100 -> 50 by pooser
DSC2_WIDTH 20 40
DSC2_THRESHOLD 50 60
==========================
TAGH
==========================
FADC250_MODE 9
FADC250_W_OFFSET 895
FADC250_W_WIDTH 100
FADC250_NSB 3
FADC250_NSA 6
FADC250_NPEAK 3
FADC250_NSAT 2
# changed from 120 to 300
FADC250_READ_THR 300
FADC250_TRIG_BL 100
FADC250_TRIG_THR 300
FADC250_TRIG_NSB 3
FADC250_TRIG_NSA 6
FADC250_COM_DIR /gluex/CALIB/ALL/fadc250/default
FADC250_COM_VER default
FADC250_USER_DIR /home/
FADC250_USER_VER
# CTP_USE 0
# F1 TDC
F1TDC_WINDOW 600.
F1TDC_LATENCY 3600.
F1TDC_CLOCK 1
# LE discriminator
DSC2_WIDTH 20 40
DSC2_THRESHOLD 45 45
==========================
TAGM
==========================
FADC250_MODE 9
# FADC250_W_OFFSET 895
# FADC250_W_OFFSET 905
# Changed from 905 to 819 (12/15/16)
FADC250_W_OFFSET 890
# FADC250_W_WIDTH 100
#changed from 100 to 60 (12/17/2016)
FADC250_W_WIDTH 60
FADC250_NSB 3
FADC250_NSA 6
FADC250_NPEAK 3
FADC250_NSAT 2
# For low gain mode
#FADC250_READ_THR 115 #(early spring 2016)
#FADC250_READ_THR 250 # 4/9/16 aeb
#FADC250_READ_THR 115 # 2/4/17 by AEB, new fibers not yet calibrated
FADC250_READ_THR 150 # 1/14/18 by AEB/RTJ
# For high gain mode
#FADC250_READ_THR 180 # (change 3/30/2016 by RTJ)
#FADC250_READ_THR 140
#FADC250_READ_THR 200 # (new defaults 4/21/16 by AEB)
FADC250_TRIG_BL 100
#FADC250_TRIG_THR 210
#FADC250_TRIG_THR 400 # (new defaults 4/21/16 by AEB)
#FADC250_TRIG_THR 115 # (match read thr, 2/4/17 by AEB)
FADC250_TRIG_THR 150 # (match read thr, 1/14/18 by AEB/RTJ)
FADC250_TRIG_NSB 3
FADC250_TRIG_NSA 15
FADC250_COM_DIR /gluex/CALIB/ALL/fadc250/default
FADC250_COM_VER default
# FADC250_USER_DIR /gluex/CALIB/TAGM/fadc250/user/spring_2018
# FADC250_USER_VER spring_2018_v1
# New thresholds from Richard, 9/29/2018
# FADC250_USER_VER fall_2018_v1
FADC250_USER_DIR /gluex/CALIB/TAGM/fadc250/user/spring_2019
FADC250_USER_VER spring_2019_v1
CTP_USE 0
# F1 TDC
# F1TDC_WINDOW 600.
# changed from 600 to 500 (12/17/2016)
# changed from 500 to 300 (02/01/2017)
F1TDC_WINDOW 300.
F1TDC_LATENCY 3600.
F1TDC_CLOCK 1
# LE discriminator
# Change for high gain mode
DSC2_WIDTH 20 40
#DSC2_THRESHOLD 20 20 (changed 2/10/16 by A.B.)
#DSC2_THRESHOLD 5 5 (changed for diamond alignment 2/20/16)
#DSC2_THRESHOLD 12 12
#DSC2_THRESHOLD 100 150 #(changed 3/30/2016 by RTJ)
#DSC2_THRESHOLD 80 80 #(new defaults 4/21/16 by AEB)
#DSC2_THRESHOLD 12 12 # 2/5/17 by AEB, new fiber calib not finished
#DSC2_COM_DIR /gluex/CALIB/ALL/dsc/default
#DSC2_COM_VER spring_2017_v3
# New thresholds from Richard, 1/17/2018
# New thresholds from Richard, 9/29/2018
# DSC2_COM_DIR /gluex/CALIB/ALL/dsc/spring-2018
# DSC2_COM_VER fall_2018_v1
DSC2_COM_DIR /gluex/CALIB/ALL/dsc/spring-2019
DSC2_COM_VER spring_2019_v1
==========================
PS
==========================
FADC250_MODE 9
# FADC250_W_OFFSET 850
# Changed from 850 to 835 (12/15/16)
FADC250_W_OFFSET 835
FADC250_W_WIDTH 100
FADC250_NSB 3
FADC250_NSA 10
FADC250_NPEAK 3
FADC250_READ_THR 130
FADC250_TRIG_BL 100
FADC250_TRIG_THR 200
FADC250_TRIG_NSB 3
FADC250_TRIG_NSA 15
FADC250_COM_DIR /gluex/CALIB/ALL/fadc250/default
FADC250_COM_VER default
FADC250_USER_DIR /home/somov/conf/cosmic
FADC250_USER_VER
==========================
PSC
==========================
FADC250_MODE 9
#FADC250_W_OFFSET 850
# Changed from 850 to 835 (12/15/16)
FADC250_W_OFFSET 835
FADC250_W_WIDTH 100
FADC250_NSB 3
FADC250_NSA 6
FADC250_NPEAK 3
FADC250_READ_THR 150
FADC250_TRIG_BL 100
FADC250_TRIG_THR 150
FADC250_TRIG_NSB 3
FADC250_TRIG_NSA 6
# F1 TDC
F1TDC_WINDOW 600
F1TDC_LATENCY 3540
F1TDC_CLOCK 1
# LE discriminator
DSC2_WIDTH 20 40
DSC2_THRESHOLD 40 40
==========================
TPOL
==========================
FADC250_MODE 10
# Sebastian, Alex increase from 795 to 832 12/19/2017
FADC250_W_OFFSET 832
# Sebastian, Alex increase from 100 to 150 12/19/2017
FADC250_W_WIDTH 50
# Changed 01/23/18 Sebastian, Beni
#FADC250_W_WIDTH 500
#Switched back to 150 1/26/18
FADC250_NSB 3
FADC250_NSA 10
FADC250_NPEAK 1
# FADC250_READ_THR 133
# Changed 12/16/16
#FADC250_READ_THR 160
# Changed 02/04/17
#FADC250_READ_THR 150
# Changed 01/23/18 Sebastian, Beni
FADC250_READ_THR 4000
#Switched back to 150 1/26/18
FADC250_TRIG_BL 100
FADC250_TRIG_THR 500
FADC250_TRIG_NSB 3
FADC250_TRIG_NSA 6