Content:
#! Run type:: PHYSICS_8 Config:: TRG_BEAMLINE_PS_m8_b1bf1.conf
#! CONFIG FILE:: /home/hdops/CDAQ/daq_dev_v0.31/daq/config/hd_all/TRG_BEAMLINE_PS_m8_b1bf1.conf
#! (Re)Created:: on Wed Apr 29 12:40:41 EDT 2015
#!
#
# DSC2_WIDTH 20 40 <- TDC width (ns), TRG width (ns)
# DSC2_THRESHOLD 20 50 <- board threshold: TDC threshold (mV), TRG threshold (mV)
#
# TS_TRIG_TYPE 1 - Internal Pulser
# 2 - External FP
# 4 - GTP
# 6 - GTP + External
#
#
# TS_FP_INPUTS - List of enabled FP inputs
#
#
# TS_SOFT_TRIG
# Trigger type (type 1 or 2 for playback)
# Number of events to trigger
# Period multiplier (depends on range 0-0x7FFF)
# Range 1 - min 120ns, increments of 30ns up to 983.13u
# 2 - min 120ns, increments of 30.72us up to 1.007s
#
#
# TI_MASTER 1 - Stand alone with master TI
#
# TI_MASTER_TRIG 1 - soft, 2 - external pulser, 3 - playback
#
# TI_SOFT_TRIG
# Trigger type (type 1 or 2 for playback)
# Number of events to trigger
# Period multiplier (depends on range 0-0x7FFF)
# Range 1 - min 120ns, increments of 30ns up to 983.13u
# 2 - min 120ns, increments of 30.72us up to 1.007s
#
# F1TDC_CLOCK 0 <- Clock Source (0 = Internal 32 MHz)
# (1 = External 31.25 MHz)
# F1TDC_VERSION 2 <- Module Version (2 = High Resolution, synchronous, 32 channels)
# (3 = Normal Resolution, synchronous, 48 channels)
# F1TDC_BIN_SIZE 0.056 <- Bin size (ns)
# F1TDC_LATENCY 3000.0 <- Trigger latency (ns)
# F1TDC_WINDOW 1000.0 <- Trigger window (ns)
==========================
TRIGGER
==========================
USE_PLAYBACK 0
TS_TRIG_TYPE 1
#TS_TRIG_TYPE 4
#TS_FP_INPUTS 11 12
#TS_SOFT_TRIG 1 64000 0x7FF 1
TS_SOFT_TRIG 1 64000 0x1F 1
TS_TD_SLOTS 9 3 5
# SSP SLOT FIBER_EN SUM_ENABLE
SSP_SLOT 5 0x02 0
# TYPE DELAY INT_WIDTH ENABLE
TRIG_EQ PS 20 10 1
TRIG_EQ BCAL_E 20 10 0
TRIG_EQ BCAL_C 20 10 0
TRIG_EQ FCAL 20 10 0
TRIG_EQ ST 20 10 0
TRIG_EQ TOF 20 10 0
# TYPE LATENCY WIDTH FCAL_E BCAL_E EN_THR NHIT LANE
TRIG_TYPE PS 420 20 1300 1900 1100 0 0
TRIG_TYPE BFCAL 440 20 1 0 2000 0 -1
TRIG_TYPE BFCAL 440 20 1 0 1500 0 -1
TRIG_TYPE BCAL_COS 440 40 1500 2100 1300 0 -1
TS_GTP_PRES 0 1
TRIG_DELAY 0
DAC_CALIB 0
TI_MASTER 0
TI_MASTER_TRIG 1
TI_FP_INPUTS 3
# TI_SOFT_TRIG 1 10000 0x7FFF 1
TI_SOFT_TRIG 1 10000 0x600 1
TI_FIBER_EN
BLOCKLEVEL 1
BUFFERLEVEL 1
# TI_FIBER_LATENCY_OFFSET 0xCA
# TI_FIBER_LATENCY_OFFSET 0xA2
# TI_FIBER_LATENCY_OFFSET 0x89
# TI_FIBER_LATENCY_OFFSET 0x96
TI_FIBER_LATENCY_OFFSET 0x98
==========================
GLOBAL
==========================
F1TDC_BIN_SIZE 0.058
-------------------------------------------------------------------
# use file:: -rw-rw-r-- 1 hdops hdops 734 Apr 26 23:30 /home/hdops/CDAQ/daq_dev_v0.31/daq/config/hd_all/master_config/FCAL.master
==========================
FCAL
==========================
FADC250_MODE 10
FADC250_W_OFFSET 820
FADC250_W_WIDTH 100
FADC250_NSB 3
FADC250_NSA 20
FADC250_NPEAK 1
FADC250_READ_THR 108
#FADC250_READ_THR 125
FADC250_TRIG_BL 100
FADC250_TRIG_THR 165
FADC250_TRIG_NSB 3
FADC250_TRIG_NSA 10
FADC250_COM_DIR /gluex/CALIB/ALL/fadc250
FADC250_COM_VER Run_2661
#FADC250_USER_DIR /home/somov/setups/tagh/parms/common/user
#FADC250_USER_VER beam
FADC250_USER_DIR /gluex/Subsystems/FCAL/FCAL_Analysis/DAQ/config
FADC250_USER_VER spring2015v2
#FADC250_USER_VER beamMannyV2
#FADC250_USER_VER beamManny
-------------------------------------------------------------------
# use file:: -rw-rw-r-- 1 hdops hdops 1054 Apr 26 23:30 /home/hdops/CDAQ/daq_dev_v0.31/daq/config/hd_all/master_config/BCAL.master
==========================
BCAL
==========================
# change offset from 905 to 885 -> Beni 6.10.2014 afternoon
# also change NSB and NSA from 3/6 to 5/40
FADC250_MODE 10
FADC250_W_OFFSET 825
FADC250_W_WIDTH 100
FADC250_NSB 5
# Dalton: increased NSA from 40
FADC250_NSA 55
FADC250_NPEAK 1
# MMD threshold from 110 to 105 (2014-12-05)
FADC250_READ_THR 105
#FADC250_READ_THR 120
FADC250_TRIG_BL 100
FADC250_TRIG_THR 120
FADC250_TRIG_NSB 3
FADC250_TRIG_NSA 19
FADC250_COM_DIR /gluex/CALIB/ALL/fadc250
FADC250_COM_VER Run_2661
FADC250_USER_DIR /gluex/CALIB/ALL/user
FADC250_USER_VER SF1
#CTP_BCAL_THR 56000
#CTP_THR 10
# F1 TDC
#change latency from 900. to 3540. and window from 500 to 1000 ->Beni
F1TDC_WINDOW 1000.
F1TDC_LATENCY 3400.
# set bin size from 0.056 to 0.058 -> Beni!
#F1TDC_BIN_SIZE 0.058
F1TDC_CLOCK 1
# LE discriminator
DSC2_WIDTH 40 40
DSC2_THRESHOLD 35 50
-------------------------------------------------------------------
# use file:: -rw-rw-r-- 1 hdops hdops 1223 Mar 13 20:31 /home/hdops/CDAQ/daq_dev_v0.31/daq/config/hd_all/master_config/TOF.master
==========================
TOF
==========================
# change latency and width from 510/200 to 910/100
# and change NSB and NSA from 3/6 to 5/20
# btw. it is BENI
# changed NSB & NSA from 5/20 to 10/45 (eugenio)
FADC250_MODE 10
FADC250_W_OFFSET 810
FADC250_W_WIDTH 100
FADC250_NSB 10
FADC250_NSA 45
FADC250_NPEAK 1
FADC250_READ_THR 110
FADC250_TRIG_BL 100
FADC250_TRIG_THR 110
FADC250_TRIG_NSB 3
FADC250_TRIG_NSA 15
#FADC250_COM_DIR /gluex/Subsystems/TOF/parms/common/fadc250
#FADC250_COM_VER ver1
FADC250_COM_DIR /gluex/CALIB/ALL/fadc250
FADC250_COM_VER Run_2661
FADC250_USER_DIR /home/
FADC250_USER_VER
CTP_BCAL_THR 56000
# LE discriminator
DSC2_WIDTH 20 40
DSC2_THRESHOLD 30 50
# CAEN 1290
#TDC1290_W_WIDTH 750
TDC1290_W_WIDTH 3800
#TDC1290_W_OFFSET -1750
#TDC1290_W_OFFSET -3640
TDC1290_W_OFFSET -3660
TDC1290_W_EXTRA 25
TDC1290_W_REJECT 50
TDC1290_BLT_EVENTS 1
TDC1290_N_HITS 64
TDC1290_ALMOSTFULL 16384
TDC1290_OUT_PROG 2
TDC1290_A24_A32 2
TDC1290_SNGL_BLT 3
TDC1290_SST_RATE 0
TDC1290_BERR_FIFO 1
TDC1290_EDGE 2
-------------------------------------------------------------------
# use file:: -rw-rw-r-- 1 hdops hdops 1020 Mar 12 13:28 /home/hdops/CDAQ/daq_dev_v0.31/daq/config/hd_all/master_config/ST.master
==========================
ST
==========================
#change latency to 925 by BENI
# also change NSA and NSB from 3/6 to 5/20
FADC250_MODE 10
FADC250_W_OFFSET 824
FADC250_W_WIDTH 100
FADC250_NSB 5
FADC250_NSA 20
FADC250_NPEAK 1
# change FADC250_READ_THR from 800 -> 110 by pooser (5 mV)
# change FADC250_READ_THR from 110 -> 120 by pooser (10 mV)
FADC250_READ_THR 120
FADC250_TRIG_BL 100
FADC250_TRIG_THR 150
FADC250_TRIG_NSB 3
FADC250_TRIG_NSA 15
FADC250_COM_DIR /gluex/CALIB/ALL/fadc250
#FADC250_COM_VER Run_1270
FADC250_COM_VER Run_2661
FADC250_USER_DIR /home/
FADC250_USER_VER
# F1 TDC
# change latency from 2100 to 3700
F1TDC_WINDOW 1500.
F1TDC_LATENCY 1800. #3460
# set bin size from 0.056 to 0.058 -> Beni!
#F1TDC_BIN_SIZE 0.058
F1TDC_CLOCK 1
# LE discriminator
# change DSC2_THRESHOLD from 100 -> 50 by pooser
DSC2_WIDTH 40 40
DSC2_THRESHOLD 50 60
-------------------------------------------------------------------
# use file:: -rw-rw-r-- 1 hdops hdops 641 Apr 23 08:08 /home/hdops/CDAQ/daq_dev_v0.31/daq/config/hd_all/master_config/CDC.master
==========================
CDC
==========================
#Normal Running
FADC125_MODE 8
FADC125_W_OFFSET 425
FADC125_W_WIDTH 180
FADC125_NSB 5
FADC125_NSA 80
FADC125_NPEAK 1
FADC125_THR 500
FADC125_DAC 800
FADC125_F_REV 0x0219
FADC125_B_REV 0x0908
FADC125_P_REV 0x0908
FADC125_TYPE 0xf125
#FADC125_COM_DIR /gluex/CALIB/ALL/fadc125
#FADC125_COM_VER Run_1070
#FADC125_COM_VER Run_2661
#
FADC125_COM_DIR /gluex/CALIB/ALL/fadc125
FADC125_COM_VER ver2
FADC125_USER_DIR /gluex/
FADC125_USER_VER
-------------------------------------------------------------------
# use file:: -rw-rw-r-- 1 hdops hdops 873 Apr 25 23:07 /home/hdops/CDAQ/daq_dev_v0.31/daq/config/hd_all/master_config/FDC.master
==========================
FDC
==========================
FADC125_MODE 8
#FADC125_W_OFFSET 427
FADC125_W_OFFSET 430
FADC125_W_WIDTH 100
FADC125_NSB 3
FADC125_NSA 40
FADC125_NPEAK 1
FADC125_THR 70
FADC125_DAC 800
FADC125_COM_DIR /gluex/CALIB/ALL/fadc125
#FADC125_COM_VER Run_1269
#FADC125_COM_VER Run_2661
FADC125_COM_VER ver2
FADC125_USER_DIR /home/
FADC125_USER_VER
# F1 TDC
# change latency and window back to what we expect from ADCs (Beni)
F1TDC_WINDOW 1750.
F1TDC_LATENCY 3560.
#F1TDC_BIN_SIZE 0.112
# High-resolution board in slot 17
# changed by Beni (loser) 2014.10.6
F1TDC_HR_WINDOW 1500.
F1TDC_HR_LATENCY 1760.
# set bin size from 0.056 to 0.058 -> Beni!
#F1TDC_HR_BIN_SIZE 0.058
F1TDC_CLOCK 1
-------------------------------------------------------------------
# use file:: -rw-rw-r-- 1 hdops hdops 858 Mar 12 13:29 /home/hdops/CDAQ/daq_dev_v0.31/daq/config/hd_all/master_config/TAGH.master
==========================
TAGH
==========================
FADC250_MODE 10
#FADC250_W_OFFSET 895
FADC250_W_OFFSET 905
FADC250_W_WIDTH 100
FADC250_NSB 3
FADC250_NSA 6
FADC250_NPEAK 1
# changed from 120 to 300
FADC250_READ_THR 300
FADC250_TRIG_BL 100
FADC250_TRIG_THR 200
FADC250_TRIG_NSB 3
FADC250_TRIG_NSA 15
#FADC250_COM_DIR /home/somov/setups/tagh/parms/common/fadc250
#FADC250_COM_VER ver1
FADC250_COM_DIR /gluex/CALIB/ALL/fadc250
#FADC250_COM_VER Run_1270
FADC250_COM_VER Run_2661
FADC250_USER_DIR /home/
FADC250_USER_VER
CTP_USE 0
# F1 TDC
F1TDC_WINDOW 1500.
F1TDC_LATENCY 3600.
#F1TDC_BIN_SIZE 0.056
F1TDC_CLOCK 1
# LE discriminator
DSC2_WIDTH 40 40
DSC2_THRESHOLD 45 45
-------------------------------------------------------------------
# use file:: -rw-rw-r-- 1 hdops hdops 987 Mar 12 13:30 /home/hdops/CDAQ/daq_dev_v0.31/daq/config/hd_all/master_config/TAGM.master
==========================
TAGM
==========================
FADC250_MODE 10
#FADC250_W_OFFSET 895
FADC250_W_OFFSET 905
FADC250_W_WIDTH 100
FADC250_NSB 3
FADC250_NSA 6
FADC250_NPEAK 1
# For low gain mode
FADC250_READ_THR 115
# For high gain mode
#FADC250_READ_THR 180
FADC250_TRIG_BL 100
FADC250_TRIG_THR 210
FADC250_TRIG_NSB 3
FADC250_TRIG_NSA 15
#FADC250_COM_DIR /gluex/release/0.1/tagm/parms/common/fadc250
#FADC250_COM_VER ver1
FADC250_COM_DIR /gluex/CALIB/ALL/fadc250
#FADC250_COM_VER Run_1270
#FADC250_COM_VER Run_1905
FADC250_COM_VER Run_2661
FADC250_USER_DIR /home/
FADC250_USER_VER
CTP_USE 0
# F1 TDC
F1TDC_WINDOW 1500.
F1TDC_LATENCY 3600.
#F1TDC_BIN_SIZE 0.056
F1TDC_CLOCK 1
# LE discriminator
# Change for high gain mode
DSC2_WIDTH 40 40
#DSC2_THRESHOLD 10 60
DSC2_THRESHOLD 20 20
-------------------------------------------------------------------
# use file:: -rw-rw-r-- 1 hdops hdops 586 Mar 13 12:29 /home/hdops/CDAQ/daq_dev_v0.31/daq/config/hd_all/master_config/PS.master
==========================
PS
==========================
FADC250_MODE 10
FADC250_W_OFFSET 880
FADC250_W_WIDTH 100
FADC250_NSB 3
FADC250_NSA 6
FADC250_NPEAK 1
FADC250_READ_THR 250
FADC250_TRIG_BL 100
FADC250_TRIG_THR 500
FADC250_TRIG_NSB 3
FADC250_TRIG_NSA 15
FADC250_COM_DIR /home/somov/setups/tagh/parms/common/fadc250
FADC250_COM_VER ver2
#
#FADC250_COM_DIR /gluex/CALIB/ALL/fadc250
#Run_2661
FADC250_USER_DIR /home/somov/conf/cosmic
FADC250_USER_VER
-------------------------------------------------------------------
# use file:: -rw-rw-r-- 1 hdops hdops 570 Mar 12 13:26 /home/hdops/CDAQ/daq_dev_v0.31/daq/config/hd_all/master_config/PSC.master
==========================
PSC
==========================
FADC250_MODE 10
FADC250_W_OFFSET 800
FADC250_W_WIDTH 100
FADC250_NSB 3
FADC250_NSA 6
FADC250_NPEAK 1
FADC250_READ_THR 250
FADC250_TRIG_BL 100
FADC250_TRIG_THR 500
FADC250_TRIG_NSB 3
FADC250_TRIG_NSA 10
# F1 TDC
F1TDC_WINDOW 1500.
F1TDC_LATENCY 1800.
# set bin size from 0.056 to 0.058 -> Beni!
#F1TDC_BIN_SIZE 0.056
F1TDC_CLOCK 1
# LE discriminator
DSC2_WIDTH 40 40
DSC2_THRESHOLD 50 100