Content:

#  DSC2_WIDTH      20  40     <- TDC width (ns),   TRG width (ns)
#  DSC2_THRESHOLD  20  50     <- board threshold:  TDC threshold (mV), TRG threshold (mV)
#
#  TS_TRIG_TYPE  1  -  Internal Pulser
#                2  -  External FP
#                4  -  GTP
#                6  -  GTP + External
#
#
#  TS_FP_INPUTS  - List of enabled  FP  inputs
#   
#
#  TS_SOFT_TRIG
#    Trigger type (type 1 or 2 for playback)
#    Number of events to trigger
#    Period multiplier (depends on range 0-0x7FFF)
#    Range 1  -   min  120ns, increments of 30ns up to 983.13u
#          2  -   min  120ns, increments of 30.72us up to 1.007s
#
#
#  TI_MASTER 1 - Stand alone with master TI
#
#  TI_MASTER_TRIG 1 - soft, 2 - external pulser, 3 - playback
#
#  TI_SOFT_TRIG
#    Trigger type (type 1 or 2 for playback)
#    Number of events to trigger
#    Period multiplier (depends on range 0-0x7FFF)
#    Range 1  -   min  120ns, increments of 30ns up to 983.13u
#          2  -   min  120ns, increments of 30.72us up to 1.007s
#
#  F1TDC_CLOCK     0       <- Clock Source (0 = Internal 32 MHz)
#                                       (1 = External 31.25 MHz)
#  F1TDC_VERSION   2       <- Module Version (2 = High Resolution, synchronous, 32 channels)
#                                         (3 = Normal Resolution, synchronous, 48 channels)
# set bin size from 0.056 to 0.058 -> Beni!
#  F1TDC_BIN_SIZE  0.058   <- Bin size (ns)
#  F1TDC_LATENCY   3000.0  <- Trigger latency (ns)
#  F1TDC_WINDOW    1000.0  <- Trigger window (ns)



==========================
	TRIGGER
==========================

#CALIBRATION   1


TS_TRIG_TYPE  2

TS_FP_INPUTS  3 

TS_SOFT_TRIG  1  64000   0x1FFF  1

TS_TD_SLOTS  10  9  14  


# TS_FP_DELAY   3   427
# TS_FP_DELAY   3   480

TS_FP_DELAY   3   500

# SSP      SLOT      FIBER_EN    SUM_ENABLE
SSP_SLOT     9         0x2F        0
SSP_SLOT    10         0x3D        0
SSP_SLOT    14         0x7F        0

#            TYPE       DELAY     INT_WIDTH     ENABLE

TRIG_EQ      PS          20         10           0
TRIG_EQ      BCAL_E      20         10           0
TRIG_EQ      BCAL_C      20         10           0
TRIG_EQ      FCAL        20         10           0
# TRIG_EQ      ECAL        20         10           0
TRIG_EQ      ST          20         10           0
TRIG_EQ      TOF         20         10           0


#            TYPE      LATENCY     WIDTH     FCAL_E    BCAL_E     EN_THR   NHIT LANE

TRIG_TYPE     BFCAL       440        20       1           0        1500     0    -1

TS_GTP_PRES  0  1

TRIG_DELAY  0
DAC_CALIB   0 

# TEST 2, THR = 3
TS_TRIG_HOLD  1  10    0
TS_TRIG_HOLD  2  127   0
TS_TRIG_HOLD  4  40    0
TS_TRIG_HOLD  3  2     1



TI_FIBER_LATENCY_OFFSET  0x98

TI_MASTER  0

TI_MASTER_TRIG  1

TI_FP_INPUTS 3

# TI_SOFT_TRIG  1  10000   0x7FFF   1

TI_SOFT_TRIG  1  10000   0x600   1

TI_FIBER_EN  


BLOCKLEVEL   40

BUFFERLEVEL  4

==========================
        GLOBAL  
==========================

F1TDC_BIN_SIZE   0.058

FADC250_BUSY 3

FADC125_BUSY 3

FADC250_FORMAT  2

FADC125_FORMAT  1

==========================
         FCAL   
==========================

FADC250_MODE         9
FADC250_W_OFFSET     850
FADC250_W_WIDTH      100
FADC250_NSB          3
FADC250_NSA          20 
FADC250_NPEAK        1

FADC250_READ_THR     108

FADC250_TRIG_BL      100
FADC250_TRIG_THR     165
FADC250_TRIG_NSB     3
FADC250_TRIG_NSA     10


FADC250_COM_DIR      /gluex/CALIB/ALL/fadc250/default
FADC250_COM_VER      default

FADC250_USER_DIR    /gluonfs1/gluex/Subsystems/FCAL/FCAL_Analysis/DAQ/config/spring_2015
FADC250_USER_VER    spring2015v2