Content:
#! Run type:: PHYSICS Config:: TRG_FCAL_BCAL_short_b20.conf
#! OUTPUT NAME:: /home/hdops/CDAQ/daq_dev_v0.31/daq/config/hd_all/TRG_FCAL_BCAL_short_b20.conf
#! (Re)Created:: on Tue Feb 9 07:30:32 EST 2016
#!
# DSC2_WIDTH 20 40 <- TDC width (ns), TRG width (ns)
# DSC2_THRESHOLD 20 50 <- board threshold: TDC threshold (mV), TRG threshold (mV)
#
# TS_TRIG_TYPE 1 - Internal Pulser
# 2 - External FP
# 4 - GTP
# 6 - GTP + External
#
#
# TS_FP_INPUTS - List of enabled FP inputs
#
#
# TS_SOFT_TRIG
# Trigger type (type 1 or 2 for playback)
# Number of events to trigger
# Period multiplier (depends on range 0-0x7FFF)
# Range 1 - min 120ns, increments of 30ns up to 983.13u
# 2 - min 120ns, increments of 30.72us up to 1.007s
#
#
# TI_MASTER 1 - Stand alone with master TI
#
# TI_MASTER_TRIG 1 - soft, 2 - external pulser, 3 - playback
#
# TI_SOFT_TRIG
# Trigger type (type 1 or 2 for playback)
# Number of events to trigger
# Period multiplier (depends on range 0-0x7FFF)
# Range 1 - min 120ns, increments of 30ns up to 983.13u
# 2 - min 120ns, increments of 30.72us up to 1.007s
#
# F1TDC_CLOCK 0 <- Clock Source (0 = Internal 32 MHz)
# (1 = External 31.25 MHz)
# F1TDC_VERSION 2 <- Module Version (2 = High Resolution, synchronous, 32 channels)
# (3 = Normal Resolution, synchronous, 48 channels)
# set bin size from 0.056 to 0.058 -> Beni!
# F1TDC_BIN_SIZE 0.058 <- Bin size (ns)
# F1TDC_LATENCY 3000.0 <- Trigger latency (ns)
# F1TDC_WINDOW 1000.0 <- Trigger window (ns)
==========================
TRIGGER
==========================
#CALIBRATION 1
TS_TRIG_TYPE 4
#TS_FP_INPUTS 11 12
TS_SOFT_TRIG 1 64000 0x1FFF 1
TS_TD_SLOTS 9 3 10 8 6 4 5 7 14
# SSP SLOT FIBER_EN SUM_ENABLE
SSP_SLOT 8 0xFF 1
SSP_SLOT 9 0x3F 1
SSP_SLOT 10 0x1F 1
# TYPE DELAY INT_WIDTH ENABLE
TRIG_EQ PS 35 10 0
TRIG_EQ BCAL_E 20 20 1
TRIG_EQ BCAL_C 20 0 0
TRIG_EQ FCAL 8 10 1
TRIG_EQ ST 20 10 0
TRIG_EQ TOF 20 10 0
# TYPE LATENCY WIDTH FCAL_E BCAL_E EN_THR NHIT LANE
TRIG_TYPE PS 440 5 1300 1900 1100 0 -1
TRIG_TYPE BFCAL 440 20 5 1 10000 0 -1
TRIG_TYPE BFCAL 440 20 6 1 12000 0 -1
TRIG_TYPE BFCAL 440 20 40 1 64000 0 -1
#TRIG_TYPE BFCAL 440 5 28 4 18000 0 0
TRIG_TYPE BFCAL 440 5 10 3 18000 0 0
TRIG_TYPE BFCAL 440 20 4 1 6000 0 -1
TRIG_TYPE BFCAL 440 5 1 0 1800 0 1
TRIG_TYPE BFCAL 440 5 0 1 6000 0 2
TRIG_TYPE BCAL_COS 440 40 1500 2100 1300 0 -1
#TS_GTP_PRES 0 2
#TS_GTP_PRES 1 2
#TS_GTP_PRES 2 2
#TS_GTP_PRES 3 2
#TS_GTP_PRES 0 10
#TS_GTP_PRES 1 5
#TS_GTP_PRES 2 5
TRIG_DELAY 0
DAC_CALIB 0
TI_FIBER_LATENCY_OFFSET 0x98
TS_COIN_WIND 10
# TS_TRIG_HOLD 63 0
TS_TRIG_HOLD 1 1
TI_MASTER 0
TI_MASTER_TRIG 1
TI_FP_INPUTS 3
# TI_SOFT_TRIG 1 10000 0x7FFF 1
TI_SOFT_TRIG 1 10000 0x600 1
BLOCKLEVEL 20
BUFFERLEVEL 8
==========================
GLOBAL
==========================
F1TDC_BIN_SIZE 0.058
-------------------------------------------------------------------
# use file:: -rw-rw-r-- 1 hdops hdops 679 Dec 18 03:18 /home/hdops/CDAQ/daq_dev_v0.31/daq/config/hd_all/master_config/FCAL.master
==========================
FCAL
==========================
FADC250_MODE 7
FADC250_W_OFFSET 820
FADC250_W_WIDTH 100
FADC250_NSB 0
FADC250_NSA 15
FADC250_NPEAK 1
FADC250_READ_THR 108
#FADC250_READ_THR 125
FADC250_TRIG_BL 100
FADC250_TRIG_THR 165
FADC250_TRIG_NSB 3
FADC250_TRIG_NSA 10
FADC250_COM_DIR /gluex/CALIB/ALL/fadc250/default
FADC250_COM_VER default
#FADC250_USER_DIR /gluex/Subsystems/FCAL/FCAL_Analysis/DAQ/config
#FADC250_USER_VER spring2015v2
FADC250_USER_DIR /gluonfs1/gluex/CALIB/FCAL/fadc250/user/fall_2015
FADC250_USER_VER ring4_hot_v1
-------------------------------------------------------------------
# use file:: -rw-rw-r-- 1 hdops hdops 1032 Dec 18 17:17 /home/hdops/CDAQ/daq_dev_v0.31/daq/config/hd_all/master_config/BCAL.master
==========================
BCAL
==========================
# change offset from 905 to 885 -> Beni 6.10.2014 afternoon
# also change NSB and NSA from 3/6 to 5/40
FADC250_MODE 7
FADC250_W_OFFSET 825
FADC250_W_WIDTH 100
# Dalton: 2015-11-25 NSB -5->0 NSA 55->26
FADC250_NSB 0
FADC250_NSA 26
FADC250_NPEAK 3
# MMD threshold from 110 to 105 (2014-12-05)
FADC250_READ_THR 105
FADC250_TRIG_BL 100
FADC250_TRIG_THR 120
FADC250_TRIG_NSB 3
FADC250_TRIG_NSA 19
FADC250_COM_DIR /gluex/CALIB/ALL/fadc250/default
FADC250_COM_VER default
FADC250_USER_DIR /gluex/CALIB/ALL/user
FADC250_USER_VER SF1
#CTP_BCAL_THR 56000
#CTP_THR 10
# F1 TDC
#change latency from 900. to 3540. and window from 500 to 1000 ->Beni
F1TDC_WINDOW 1000.
F1TDC_LATENCY 3400.
# set bin size from 0.056 to 0.058 -> Beni!
#F1TDC_BIN_SIZE 0.058
F1TDC_CLOCK 1
# LE discriminator
DSC2_WIDTH 40 40
DSC2_THRESHOLD 35 50
-------------------------------------------------------------------
# use file:: -rw-rw-r-- 1 hdops hdops 1120 Dec 14 09:27 /home/hdops/CDAQ/daq_dev_v0.31/daq/config/hd_all/master_config/TOF.master
==========================
TOF
==========================
# change latency and width from 510/200 to 910/100
# and change NSB and NSA from 3/6 to 5/20
# btw. it is BENI
# changed NSB & NSA from 5/20 to 10/45 (eugenio)
FADC250_MODE 7
FADC250_W_OFFSET 810
FADC250_W_WIDTH 100
FADC250_NSB 0
FADC250_NSA 25
FADC250_NPEAK 1
FADC250_READ_THR 110
FADC250_TRIG_BL 100
FADC250_TRIG_THR 110
FADC250_TRIG_NSB 3
FADC250_TRIG_NSA 15
FADC250_COM_DIR /gluex/CALIB/ALL/fadc250/default
FADC250_COM_VER default
FADC250_USER_DIR /home/
FADC250_USER_VER
CTP_BCAL_THR 56000
# LE discriminator
DSC2_WIDTH 20 40
DSC2_THRESHOLD 30 50
# CAEN 1290
#TDC1290_W_WIDTH 750
TDC1290_W_WIDTH 3800
#TDC1290_W_OFFSET -1750
#TDC1290_W_OFFSET -3640
TDC1290_W_OFFSET -3660
TDC1290_W_EXTRA 25
TDC1290_W_REJECT 50
TDC1290_BLT_EVENTS 1
TDC1290_N_HITS 64
TDC1290_ALMOSTFULL 16384
TDC1290_OUT_PROG 2
TDC1290_A24_A32 2
TDC1290_SNGL_BLT 3
TDC1290_SST_RATE 0
TDC1290_BERR_FIFO 1
TDC1290_EDGE 2
-------------------------------------------------------------------
# use file:: -rw-rw-r-- 1 hdops hdops 980 Oct 22 18:34 /home/hdops/CDAQ/daq_dev_v0.31/daq/config/hd_all/master_config/ST.master
==========================
ST
==========================
#change latency to 925 by BENI
# also change NSA and NSB from 3/6 to 5/20
FADC250_MODE 7
FADC250_W_OFFSET 824
FADC250_W_WIDTH 100
FADC250_NSB 5
FADC250_NSA 20
FADC250_NPEAK 1
# change FADC250_READ_THR from 800 -> 110 by pooser (5 mV)
# change FADC250_READ_THR from 110 -> 120 by pooser (10 mV)
FADC250_READ_THR 120
FADC250_TRIG_BL 100
FADC250_TRIG_THR 150
FADC250_TRIG_NSB 3
FADC250_TRIG_NSA 15
FADC250_COM_DIR /gluex/CALIB/ALL/fadc250/default
FADC250_COM_VER default
FADC250_USER_DIR /home/
FADC250_USER_VER
# F1 TDC
# change latency from 2100 to 3700
F1TDC_WINDOW 1000.
F1TDC_LATENCY 3460.
# set bin size from 0.056 to 0.058 -> Beni!
#F1TDC_BIN_SIZE 0.058
F1TDC_CLOCK 1
# LE discriminator
# change DSC2_THRESHOLD from 100 -> 50 by pooser
DSC2_WIDTH 40 40
DSC2_THRESHOLD 50 60
-------------------------------------------------------------------
# use file:: -rw-rw-r-- 1 hdops hdops 713 Feb 8 23:07 /home/hdops/CDAQ/daq_dev_v0.31/daq/config/hd_all/master_config/CDC.master
==========================
CDC
==========================
# FADC125_MODE can be:
# 3 = CDC_short 6 = CDC_long
# 4 = FDC_short 7 = FDC_sum_long
# 5 = FDC_amp_short 8 = FDC_amp_long
FADC125_MODE 3
FADC125_W_OFFSET 425
FADC125_W_WIDTH 200
FADC125_IE 200
FADC125_NPEAK 1
FADC125_PG 4
FADC125_P1 4
FADC125_P2 4
FADC125_IBIT 4
FADC125_ABIT 3
FADC125_PBIT 0
FADC125_TH 100
FADC125_TL 25
FADC125_THR 500
FADC125_DAC 800
FADC125_COM_DIR /gluex/CALIB/ALL/fadc125/default
FADC125_COM_VER default
FADC125_USER_DIR /gluex/
FADC125_USER_VER
-------------------------------------------------------------------
# use file:: -rw-rw-r-- 1 hdops hdops 1076 Feb 2 15:02 /home/hdops/CDAQ/daq_dev_v0.31/daq/config/hd_all/master_config/FDC.master
==========================
FDC
==========================
# FADC125_MODE can be:
# 3 = CDC_short 6 = CDC_long
# 4 = FDC_short 7 = FDC_sum_long
# 5 = FDC_amp_short 8 = FDC_amp_long
FADC125_MODE 5
FADC125_W_OFFSET 415
FADC125_W_WIDTH 80
FADC125_IE 80
FADC125_NPEAK 1
FADC125_PG 4
FADC125_P1 4
FADC125_P2 4
FADC125_IBIT 4
FADC125_ABIT 0
FADC125_PBIT 2
FADC125_TH 100
FADC125_TL 25
FADC125_THR 70
FADC125_DAC 800
FADC125_COM_DIR /gluex/CALIB/ALL/fadc125/default
FADC125_COM_VER default
FADC125_USER_DIR /gluex/
FADC125_USER_VER
# F1 TDC
# change latency and window back to what we expect from ADCs (Beni)
F1TDC_WINDOW 1400.
F1TDC_LATENCY 3560.
#F1TDC_BIN_SIZE 0.112
# High-resolution board in slot 17
# changed by Beni (loser) 2014.10.6
F1TDC_HR_WINDOW 1000.
F1TDC_HR_LATENCY 1160.
# set bin size from 0.056 to 0.058 -> Beni!
#F1TDC_HR_BIN_SIZE 0.058
F1TDC_CLOCK 1
-------------------------------------------------------------------
# use file:: -rw-rw-r-- 1 hdops hdops 723 Oct 22 18:34 /home/hdops/CDAQ/daq_dev_v0.31/daq/config/hd_all/master_config/TAGH.master
==========================
TAGH
==========================
FADC250_MODE 7
#FADC250_W_OFFSET 895
FADC250_W_OFFSET 905
FADC250_W_WIDTH 100
FADC250_NSB 3
FADC250_NSA 6
FADC250_NPEAK 3
# changed from 120 to 300
FADC250_READ_THR 300
FADC250_TRIG_BL 100
FADC250_TRIG_THR 200
FADC250_TRIG_NSB 3
FADC250_TRIG_NSA 15
FADC250_COM_DIR /gluex/CALIB/ALL/fadc250/default
FADC250_COM_VER default
FADC250_USER_DIR /home/
FADC250_USER_VER
CTP_USE 0
# F1 TDC
F1TDC_WINDOW 600.
F1TDC_LATENCY 3600.
#F1TDC_BIN_SIZE 0.056
F1TDC_CLOCK 1
# LE discriminator
DSC2_WIDTH 40 40
DSC2_THRESHOLD 45 45
-------------------------------------------------------------------
# use file:: -rw-rw-r-- 1 hdops hdops 821 Oct 22 18:35 /home/hdops/CDAQ/daq_dev_v0.31/daq/config/hd_all/master_config/TAGM.master
==========================
TAGM
==========================
FADC250_MODE 7
#FADC250_W_OFFSET 895
FADC250_W_OFFSET 905
FADC250_W_WIDTH 100
FADC250_NSB 3
FADC250_NSA 6
FADC250_NPEAK 3
# For low gain mode
FADC250_READ_THR 115
# For high gain mode
#FADC250_READ_THR 180
FADC250_TRIG_BL 100
FADC250_TRIG_THR 210
FADC250_TRIG_NSB 3
FADC250_TRIG_NSA 15
FADC250_COM_DIR /gluex/CALIB/ALL/fadc250/default
FADC250_COM_VER default
FADC250_USER_DIR /home/
FADC250_USER_VER
CTP_USE 0
# F1 TDC
F1TDC_WINDOW 600.
F1TDC_LATENCY 3600.
#F1TDC_BIN_SIZE 0.056
F1TDC_CLOCK 1
# LE discriminator
# Change for high gain mode
DSC2_WIDTH 40 40
#DSC2_THRESHOLD 10 60
DSC2_THRESHOLD 20 20
-------------------------------------------------------------------
# use file:: -rw-rw-r-- 1 hdops hdops 577 Apr 30 2015 /home/hdops/CDAQ/daq_dev_v0.31/daq/config/hd_all/master_config/PS.master
==========================
PS
==========================
FADC250_MODE 7
FADC250_W_OFFSET 880
FADC250_W_WIDTH 100
FADC250_NSB 3
FADC250_NSA 6
FADC250_NPEAK 1
FADC250_READ_THR 250
FADC250_TRIG_BL 100
FADC250_TRIG_THR 500
FADC250_TRIG_NSB 3
FADC250_TRIG_NSA 15
FADC250_COM_DIR /gluex/CALIB/ALL/fadc250/default
FADC250_COM_VER default
#
#FADC250_COM_DIR /gluex/CALIB/ALL/fadc250
#default
FADC250_USER_DIR /home/somov/conf/cosmic
FADC250_USER_VER
-------------------------------------------------------------------
# use file:: -rw-rw-r-- 1 hdops hdops 570 Mar 12 2015 /home/hdops/CDAQ/daq_dev_v0.31/daq/config/hd_all/master_config/PSC.master
==========================
PSC
==========================
FADC250_MODE 7
FADC250_W_OFFSET 800
FADC250_W_WIDTH 100
FADC250_NSB 3
FADC250_NSA 6
FADC250_NPEAK 1
FADC250_READ_THR 250
FADC250_TRIG_BL 100
FADC250_TRIG_THR 500
FADC250_TRIG_NSB 3
FADC250_TRIG_NSA 10
# F1 TDC
F1TDC_WINDOW 500.
F1TDC_LATENCY 900.
# set bin size from 0.056 to 0.058 -> Beni!
#F1TDC_BIN_SIZE 0.056
F1TDC_CLOCK 1
# LE discriminator
DSC2_WIDTH 40 40
DSC2_THRESHOLD 50 100