FDC procedures
D000000103P001 FDC CUTTING CATHODE FOIL
D000000103P002 FDC ALIGNING AND GLUING CATHODE FOIL
D000000103P003 FDC CATHODE GLUING ON TRANSFER RING
D000000103P004 FDC CATHODE FOIL TENSIONING
D000000103P005 FDC CATHODE GLUING FRAME TO THE FOIL
D000000103P006 FDC CUTTING CATHODE FOIL HOLES AND SLOTS
D000000103P007 FDC CATHODE GROUND FLAPS AND PANEL CONNECTIONS
D000000103P009 FDC GLUING MYLAR TO THE TRANSFER RING
D000000103P010 FDC MYLAR TENSIONING AND GLUING
D000000103P011 FDC FORMING GROUND PLANE CONNECTIONS
D000000103P012 FDC WIREPLANE PCB FITTING AND GLUING
D000000103P013 FDC WIREPLANE PCB GAS BLOCK ATTACHMENT
D000000103P015 FDC WIREPLANE LAMINATE THE G10/ROHACELL RING TO PCB
D000000103P018 FDC WIREPLANE CLEAN FOR ENTRY INTO CLEANROOM
D000000103P020 FDC WIREPLANE ATTACH TO STRONGBACK AND WIRING PREP
D000000103P021 FDC WIREPLANE STRING AND TENSION ALL WIRES
D000000103P024 FDC WIREPLANE SCAN WIRE POSITIONS
D000000103P025 FDC WIREPLANE APPLY EPOXY RING AND FIX WIRE
D000000103P026 FDC WIREPLANE SOLDER WIRES
D000000103P027 FDC WIREPLANE FREQUENCY TO TENSION MEASUREMENT
D000000103P028 FDC WIREPLANE CUT WIRES AND REMOVE TAPE
D000000103P029 FDC WIREPLANE INSPECT AND INITIAL ELECTRICAL TEST OF BOARD
D000000103P035 FDC WIREPLANE LAMINATION INSPECTION
D000000103P036 FDC CLEANROOM PROCEDURE
D000000103P037 FDC CATHODE G10 RING INSPECTION
D000000103P038 FDC CATHODE FOIL INSPECTION AND TEST
D000000103P039 ATTACHING THE DAUGHTER CARDS TO CATHODE FRAME
D000000103P041 FDC END WINDOW GLUING AND TENSIONING
