Revision as of 16:15, 17 January 2012

Teleconference Time: 11:00 a.m. EST'

• ESNET (Number is 8542553) and EVO session (GlueX Calorimetry meeting room)
• Phone connection only upon request.
  • +1-866-740-1260 : US+Canada
  • +1-303-248-0285 : International
  • then enter participant code: 3421244# (remember the "#").
  • or www.readytalk.com (and code without the #)

Participant Direct Lines

• JLab Phone: in CC F326 is 757-269-6337 (usual room)
• JLab Phone in CC L207 is 757-269-7084
• Phone in the Regina Videoconference Suite is 306-585-4204
• Athens Phone: in Christina's office is 011-30-210-727-6947

Items for followup from previous meeting(s)

1. Monitoring
   • Send additional SiPMs to Athens for tests (Elton). Electronics is being prepared, should be ready by next week sometime.
   • Measure stability of light intensity as a function of time.
   • Jlab to generate a drawing of the plexiglass sheet to be used in next batch of tests.
2. FCAL
   • Send IU the drawings for the FCAL welded frame. (Tim) Drawings are being signed today and will be forwarded to IU.

Tentative Agenda

1. Announcements
2. Review of Action Items
3. Monitoring.
   • First Results with UV LEDS
4. FCAL
   1. Construction Status: mechanical, bases (notes from Matt)
   2. Beam tests in Hall B (John)
5. BCAL
   1. 2006 Beam test analysis at forward angles: [1]
   2. BCAL Beam Tests 2012
   3. SiPM PDE extraction at Regina
   4. Characterization studies of silicon photomultipliers NIM A620 (2010) 217 (Link for JLab)
      • Key Figure 8
6. USM update
   1. PDE measurement update at USM
7. TDR update
   • We need to start revising our section
8. Simulations/Reconstruction
9. Any other business

Minutes

Attending: David, Tim, Beni, John L., John D., Elton (JLab); Will, Serguei (USM); Zisis, George, Andrei (UofR); George, Christina (Athens).

1. Announcements
2. Review of Action Items
3. Monitoring.
   • First Results with UV LEDS
   • Tested UV LED and it performs similar to other light colors. Uniformity seems to be more uniform over a larger area.
4. FCAL
   1. Construction Status: mechanical, bases (notes from Matt)
      • Mechanical includes outer welded structure and inner stair step clamps for glass
      • Inner parts are being fabricated in the IU shop
      • Outer welded structure drawing package is out for bids by outside contractor
      • PMTs are being glued to light guides. Have glued about 700, and tested about 600. Tested all new tubes, about 450. 3 failures
      • Tested about 150 from the old pmts, 2 cracked windows, 1 failure
      • Concern about the cracked windows. Slow down and do more careful tests with 20-30 pmts. Concern about whether the type of glass is different between old and new, but could be aging.
      • Status of CW bases. Comm boards completed. Multiplier board, which generate the HV
      • Fabrication without conformal coating are mostly resolved
      • Latest batch with conformal coating was horrible and have been returned to the vendor.
   2. Beam tests in Hall B (John)
      • Gains are balanced, checking that the procedure is robust
      • Detector is aligned relative to small remote paddle.
      • Next: reduce size of remote paddle, move detector down to floor, merge DAQ with Hall B tagger to check electron energy
      • Resolution is about deltaE/E ~ 22%
5. BCAL
   1. 2006 Beam test analysis at forward angles
      • Presenting data at small angles from the Hall B beam test. Recall we tested a full length, but rectangular cross section and blue HiTech fibers
      • Map angle dependence of resolution (Stamatis' thesis).
      • Resolution degrades from about 5.5/sqrt(E) to 7.2/sqrt(E).
   2. BCAL Beam Tests 2012
   3. SiPM PDE extraction at Regina
   4. Characterization studies of silicon photomultipliers NIM A620 (2010) 217 (Link for JLab)
      • Key Figure 8
6. USM update
   1. PDE measurement update at USM
7. TDR update
   • We need to start revising our section
8. Simulations/Reconstruction
9. Any other business