Revision as of 08:14, 6 September 2024

Meeting time and location:

Agenda

Preparation of parts for ECAL -- Sasha
- - HV long cable: Sammy and Mindy are finishing up with assembling 10 cables
- - HV distribution boards [1][2]
- - Fix front panel of two LV distribution boards, re-install the boards on the detector frame [3]
- - LED: Started testing the prototype of the LMS (need to make the detector room light tight)
Installation of the FCAL2 detector & integration to GlueX -- Sasha / Vlad / Hakob / Laveen
- Report from students [4]
- Installation of HV cables [5][6]

- two remaining bundle of cables will be ready in about a week

- Installation and testing cables and dividers [7]
- Installation of long signal cables [8]
- Installation LV patch panels and cables [9]
- Installation of optical fibers [10]
- Detector installation page
- Safety briefings
Students -- Sasha
- - Expect one student from Wuhan, waiting for the US visa
Beam tests with the PS
- - measure shower beam profile and reconstruction in the crystal/LG transition region
  - (install prototype with 5x5 PbWO4 modules + ? LG)
Other hardware projects
- prototype of the ECAL veto counter (?)
Analysis/Simulation
- Update from Laveen

@@ Line 6: / Line 6: @@
 *'''Preparation of parts for ECAL''' -- Sasha
-** - HV long cable: Sammy and Mindy have to assemble 10 cables
+** - HV long cable: Sammy and Mindy are finishing up with assembling 10 cables
 ** - HV distribution boards  [https://halldweb.jlab.org/detectors/fcal2/installation/meetings/08_09_2024/hv_board1.jpg][https://halldweb.jlab.org/detectors/fcal2/installation/meetings/08_09_2024/hv_board2.jpg]
 ** - Fix front panel of two LV distribution boards, re-install the boards on the detector frame [https://halldweb.jlab.org/detectors/fcal2/installation/meetings/08_09_2024/lv_board1.jpg]