Difference between revisions of "Total Absorption Counter"
From GlueXWiki
(→Observed problems) |
(→Observed problems) |
||
Line 34: | Line 34: | ||
=== Observed problems=== | === Observed problems=== | ||
− | After using Hall B lead glass TAC between 2016 and 2017 the light output significantly decreased. The radiation hardness of this lead glass is highly unlikely to exceed 10^5 rad. We are not going to be able to significantly reduce the radiation dose received by TAC since we need to accumulate meaningful statistics in the pair spectrometer with a reasonable converter thickness that does not distort the PS acceptance shape with respect to the production converter. Therefore, it is important for GlueX to have a total absorption counter made of material with radiation hardness of ~10^6 rad or better. | + | After using Hall B lead glass TAC between 2016 and 2017 the light output significantly decreased. The [[media:sf5_radiation_hardness.pdf | radiation hardness of this lead glass is highly unlikely to exceed 10^5 rad]]. We are not going to be able to significantly reduce the radiation dose received by TAC since we need to accumulate meaningful statistics in the pair spectrometer with a reasonable converter thickness that does not distort the PS acceptance shape with respect to the production converter. Therefore, it is important for GlueX to have a total absorption counter made of material with radiation hardness of ~10^6 rad or better. |
== Options considered earlier == | == Options considered earlier == |
Revision as of 14:57, 16 March 2017
CLAS Total absorption counter used for PrimEx
The table below summarizes the information I obtained from various sources about the TAC counter that GlueX borrowed from CLAS.
Property (source) | Value |
---|---|
Material (from Mahbub) | SF-5 Lead Glass |
Composition by weigth (Web) | 55% PbO, 38% SiO2, 5% K2O, 1% Na2O |
Length (from Mahbub) | 40cm |
Height (from Mahbub) | 20cm |
Width (from Mahbub) | 20cm |
Weight of lead-glass block | 65 kg |
Density (Web) | 4.08 g/cm^3 |
Radiation Length of material (Web) | ~25mm |
Critical Energy (Web) | 15.8 MeV |
Refractive index (Web) | 1.67270 |
PMT (from Mahbub) | 5 inch Hamamatsu R1250 PMT |
Observed problems
After using Hall B lead glass TAC between 2016 and 2017 the light output significantly decreased. The radiation hardness of this lead glass is highly unlikely to exceed 10^5 rad. We are not going to be able to significantly reduce the radiation dose received by TAC since we need to accumulate meaningful statistics in the pair spectrometer with a reasonable converter thickness that does not distort the PS acceptance shape with respect to the production converter. Therefore, it is important for GlueX to have a total absorption counter made of material with radiation hardness of ~10^6 rad or better.
Options considered earlier
- lead-glass counter array:
- efficiency ~100%
- to avoid radiation damage: rate < 100kHz using radiator of 10-5 X0 and ~100 pA beam
- Cerenkov counter (higher current - but probably lower efficiency)