Difference between revisions of "Rad scan in the transition region between BCAL and FCAL"
From GlueXWiki
Line 1: | Line 1: | ||
− | == SCAN with geometry of May 2011 == | + | = Radiation Scans = |
+ | |||
+ | = SCAN with geometry of May 2011 == | ||
The following plots show radiation length scans with a geantino particle from the target center toward the downstream end of the detector for the following polar angles: 9.5, 9.8, 10.0, 10.3, 10.5 10.7 and 10.9 degree. The geometry used for this scan is the current geometry as of May 25th 2011. These plots are meant for future reference on material in region of the downstream end of | The following plots show radiation length scans with a geantino particle from the target center toward the downstream end of the detector for the following polar angles: 9.5, 9.8, 10.0, 10.3, 10.5 10.7 and 10.9 degree. The geometry used for this scan is the current geometry as of May 25th 2011. These plots are meant for future reference on material in region of the downstream end of | ||
the BCAL. | the BCAL. |
Revision as of 11:51, 13 June 2011
Radiation Scans
SCAN with geometry of May 2011 =
The following plots show radiation length scans with a geantino particle from the target center toward the downstream end of the detector for the following polar angles: 9.5, 9.8, 10.0, 10.3, 10.5 10.7 and 10.9 degree. The geometry used for this scan is the current geometry as of May 25th 2011. These plots are meant for future reference on material in region of the downstream end of
the BCAL.
SCAN with New readout geometry June 2011
The new readout geometry simulates the light guides with the cooling system for the SiPMs. The scans are done from
the center of the target with polar angles from 9.1 degree up to 11.1 degree in steps of 0.2 degree.