Difference between revisions of "GlueX Start Counter Meeting, March 6, 2012"
(notes as minutes) |
|||
Line 28: | Line 28: | ||
(757)504-0664 | (757)504-0664 | ||
+ | |||
+ | =Minutes= | ||
+ | |||
+ | march 14 receipt from mcneal | ||
+ | |||
+ | werner, lei | ||
+ | tim chuck mark | ||
+ | |||
+ | overall | ||
+ | |||
+ | accuracy of placement of sipm's with respect to scint. in transverse and longitudinal dimentions | ||
+ | |||
+ | set screws to set long. gap | ||
+ | |||
+ | werner: critical dimention in radial position | ||
+ | |||
+ | light tight requrement | ||
+ | reflective material separating counters | ||
+ | |||
+ | start with precision machined inner rohacell shell | ||
+ | add scint | ||
+ | add outer shell | ||
+ | |||
+ | look at support structure in hall b | ||
+ | support of target vacuum chamber, possibility of causing leaks | ||
+ | |||
+ | spriing loading, pull the structure back againsts target structure | ||
+ | |||
+ | 200 microns on radial dimentions | ||
+ | |||
+ | more sectors allows more adjustiblity | ||
+ | need allignemnt criteria | ||
+ | |||
+ | don't forget temperature stabilization | ||
+ | talk to fernando about temperature | ||
+ | |||
+ | sasha has samples, maybe we can look at those | ||
+ | |||
+ | statement of work |
Revision as of 15:33, 6 March 2012
GlueX Start Counter Meeting
Tuesday, March 6, 2012
10 am EST
JLab: ARC, Room 428
Contents
Agenda
- Announcements
- Review minutes from previous meeting
- Prototype Report
- Contract Status
- Simulation
Communication Information
Video Conferencing
- ESNet: 8542553
- EVO:
- Meeting URL: http://evo.caltech.edu/evoNext/koala.jnlp?meeting=e9eIeivevnaeaBIsaaI9
- Phone Bridge ID: 11 7685
Slides
Talks can be deposited in the directory /group/halld/www/halldweb1/html/talks/2012-1Q
on the JLab CUE. This directory is accessible from the web at https://halldweb1.jlab.org/talks/2012-1Q/ .
Chair's Cell Phone
(757)504-0664
Minutes
march 14 receipt from mcneal
werner, lei tim chuck mark
overall
accuracy of placement of sipm's with respect to scint. in transverse and longitudinal dimentions
set screws to set long. gap
werner: critical dimention in radial position
light tight requrement reflective material separating counters
start with precision machined inner rohacell shell add scint add outer shell
look at support structure in hall b
support of target vacuum chamber, possibility of causing leaks
spriing loading, pull the structure back againsts target structure
200 microns on radial dimentions
more sectors allows more adjustiblity need allignemnt criteria
don't forget temperature stabilization talk to fernando about temperature
sasha has samples, maybe we can look at those
statement of work