Difference between revisions of "August 19, 2021 KLONG Design Meeting"
From GlueXWiki
(Created page with "== Meeting Time and Place == Thursday August 19, 2021, 1pm Bluejeans https://bluejeans.com/465620466 * Present - Hovanes Egiyan, Moskov Amaryan, Stephanie Worthington, Keith...") |
(→Minutes and Action Items) |
||
| Line 20: | Line 20: | ||
== Minutes and Action Items == | == Minutes and Action Items == | ||
| − | + | * Looking at 3D model of collimator cave. The 2 partial shield walls should have 10 cm lead on the downstream face of the concrete | |
| + | * discussed using 6 cm beampipe through wall at the mouth of the collimator cave. Need to make sure we can fit this. | ||
| + | * decided to use aluminum windows to isolate the vacuum in the beamline. 250 microns ok | ||
| + | * 10 cm distance from beryllium target to downstream vacuum window of. | ||
| + | * we will need to remove the vacuum chamber from the pair spec magnet and replace with a 6cm beam pipe | ||
| + | * use 5mm gap between beryllium and tungsten | ||
| + | * Received quotes for $28K and $11K for 98% pure beryllium, ok to use as little as 90% pure, will seek an additional quote | ||
| + | * need to look at thermal conductivity of whatever beryllium alloy is used | ||
| + | * Moskov asked if we should plan for 24 GeV beam requirement. Eugene thought this should be treated separately. | ||
== Action Items == | == Action Items == | ||
Revision as of 07:58, 2 September 2021
Meeting Time and Place
Thursday August 19, 2021, 1pm Bluejeans https://bluejeans.com/465620466
- Present - Hovanes Egiyan, Moskov Amaryan, Stephanie Worthington, Keith Harding, Igor Strakovsky, Tim Whitlatch, Mark Stevens
Agenda
- Minutes from last meeting https://halldweb.jlab.org/wiki/index.php/July_22,_2021_KLONG_Design_Meeting
- Media:KLONG_Be_target_overall.pdf
- Beryllium sealing
- Poly compression
- Preliminary 3D Model
- Collimator Cave Beamline
- Heat absorbed by Be and Tungsten (.6kw and 6Kw respectively)
- Requirements:
- Cool tungsten plug to below temperature that affects lead (327°C)
- 5 cm beam tube to PS and 6 cm to final target
- Moveable out of beamline
- Be 98% pure or better
Minutes and Action Items
- Looking at 3D model of collimator cave. The 2 partial shield walls should have 10 cm lead on the downstream face of the concrete
- discussed using 6 cm beampipe through wall at the mouth of the collimator cave. Need to make sure we can fit this.
- decided to use aluminum windows to isolate the vacuum in the beamline. 250 microns ok
- 10 cm distance from beryllium target to downstream vacuum window of.
- we will need to remove the vacuum chamber from the pair spec magnet and replace with a 6cm beam pipe
- use 5mm gap between beryllium and tungsten
- Received quotes for $28K and $11K for 98% pure beryllium, ok to use as little as 90% pure, will seek an additional quote
- need to look at thermal conductivity of whatever beryllium alloy is used
- Moskov asked if we should plan for 24 GeV beam requirement. Eugene thought this should be treated separately.
