Difference between revisions of "FDC Test"
From GlueXWiki
m |
(→Requirements and Schedules) |
||
Line 2: | Line 2: | ||
* [http://www.jlab.org/~zihlmann/zihlmann_fdctest.pdf Basic Requirements] from Beni | * [http://www.jlab.org/~zihlmann/zihlmann_fdctest.pdf Basic Requirements] from Beni | ||
* [[Media:FDC_Test_preamp_fadc125_schedule.pptx | Pre-amps and FADC 125 modules]] from Fernando | * [[Media:FDC_Test_preamp_fadc125_schedule.pptx | Pre-amps and FADC 125 modules]] from Fernando | ||
+ | |||
+ | ===DAQ for CDC and FDC=== | ||
+ | * The readout code for the FDC and CDC are located on the hdcdcops account in DAQ/daq_dev_vers/daq/vme/src/rol_cdc and there are 4 readout lists necessary for the TS crate, the ADC crates, the special TDC crate and the normal TDC crates. The name of these readout lists are: | ||
+ | ** ts_list_cdcandfdc.c TS readout if FDC and CDC are readout together | ||
+ | ** ts_list_cdconly.c TS readout list if CDC only is read out | ||
+ | ** vme_list.c readout list for the ADCs | ||
+ | ** vme_list_tdc.c readout list for the TDC crates | ||
+ | ** vme_list_tdc_special.c readout list for the special TDC crates ROCFDC1 | ||
+ | ** ccdb_code.cc code to access the data base for parameters | ||
+ | |||
+ | * The readout code requires the fa125 library which has not yet been installed in the HDOPS account. In addition it requires another library ccdb_code.so the provides the access to the ccdb_online data base. For this purpose the ccdb software needs to be installed and the proper environment variables set: | ||
+ | ** setenv CCDB_HOME /home/hdcdcops/ccdb/trunk/ccdb | ||
+ | ** setenv CCDB_CONNECTION mysql://ccdb_online@gluondb1/ccdb_online | ||
+ | ** source $CCDB_HOME/environment.csh | ||
+ | |||
+ | * Database tables for XXX = FDC or CDC: | ||
+ | ** XXX/crate_setup : Contains a list of all ROC with the number of modules and what the starting slot is | ||
+ | ** XXX/baseline : Contains what the basic target baseline should be, the baseline factor and the sparcification factor (used in ccdb_code.c) | ||
+ | ** XXX/readout_config : Contains the configuration of the ADC readout, currently readout-mode, Latency, Windowsize, NSB, NSA and NP | ||
+ | ** XXX/dac_values: contains for all ROCs, modules and channels the DAC value, the measured baseline the pedestal width |
Revision as of 15:00, 12 September 2014
Requirements and Schedules
- Basic Requirements from Beni
- Pre-amps and FADC 125 modules from Fernando
DAQ for CDC and FDC
- The readout code for the FDC and CDC are located on the hdcdcops account in DAQ/daq_dev_vers/daq/vme/src/rol_cdc and there are 4 readout lists necessary for the TS crate, the ADC crates, the special TDC crate and the normal TDC crates. The name of these readout lists are:
- ts_list_cdcandfdc.c TS readout if FDC and CDC are readout together
- ts_list_cdconly.c TS readout list if CDC only is read out
- vme_list.c readout list for the ADCs
- vme_list_tdc.c readout list for the TDC crates
- vme_list_tdc_special.c readout list for the special TDC crates ROCFDC1
- ccdb_code.cc code to access the data base for parameters
- The readout code requires the fa125 library which has not yet been installed in the HDOPS account. In addition it requires another library ccdb_code.so the provides the access to the ccdb_online data base. For this purpose the ccdb software needs to be installed and the proper environment variables set:
- setenv CCDB_HOME /home/hdcdcops/ccdb/trunk/ccdb
- setenv CCDB_CONNECTION mysql://ccdb_online@gluondb1/ccdb_online
- source $CCDB_HOME/environment.csh
- Database tables for XXX = FDC or CDC:
- XXX/crate_setup : Contains a list of all ROC with the number of modules and what the starting slot is
- XXX/baseline : Contains what the basic target baseline should be, the baseline factor and the sparcification factor (used in ccdb_code.c)
- XXX/readout_config : Contains the configuration of the ADC readout, currently readout-mode, Latency, Windowsize, NSB, NSA and NP
- XXX/dac_values: contains for all ROCs, modules and channels the DAC value, the measured baseline the pedestal width