Revision as of 09:10, 18 August 2023

Meeting time and location:

• 9:30 am EST (JLab time) remote only
• Connection information

Agenda

• Preparation of parts for ECAL modules -- Sasha
  • Crystals:

    - Received 70 crystals from SICCAS. 66 have been pre-selected by Jane's group

    - sent additional 4 (supposed to be from the previous batch). Quality of those crystals is very poor [1][2]

  • Received 900 short signal cables [3]
  • Procurement parts for the LMS:

    - Waiting for 7,600 ft of optical fibers (August/September)

• Module fabrication -- Sasha
  • All modules have been fabricated, checked, and inventorized (about 1610 modules in total)
• Ongoing projects -- Sasha, all
  • Visual inspections of fabricated modules [4] - done
  • Prepare to move modules into Hall D [5] [6][7], wrap modules with sort towels. Need to move about 100 modules to the Hall.
  • Tested, labeled, and bundled all 100 (+ 2 spares) [8] signal cables connected from the flash ADC to the patch panel [9]. Receive cartridges for the printer, will resume labeling and cable bundling today.
  • Cutting optical fibers and gluing plastic caps [10], waiting for 7600 ft of optical fibers
  • Report from students
  • Test fabricated modules using LMS [11], 1242 modules have been tested (need to update the wiki page)
  • Work on refurbishing LG modules (wrapping, PMTs, etc.)
• Testing of PMT dividers -- Sasha / Vlad
  • Received 10 dividers (first article) ! , going to test them during this week (Chris)
• Proceedures
• Installation of the FCAL2 detector & integration to GlueX -- Sasha / Arshak / Vlad / Hakob
  • Detector installation [12][13][14]
  • Detector installation page
  • Updates from the meetings with Tim's group [15]
  • Discussion of the FCAL2 installation procedures [16]
  • Final mapping of low-voltage cables
  • Projects for summer students
  • Summer Students (2023)
• Light monitoring system -- Arshak

• Writeup on FCAL-2 for JLab newsletter