Revision as of 09:15, 31 March 2023

Meeting time and location:

Agenda

Preparation of parts for FCAL2 modules -- Sasha
- Available crystals:
  1450 (modules)
  
  32 (ready for fabrication)
  
  40 (installed on CCAL)
  
  (some CCAL crystals from the inner part will not be used for the FCAL2)
  
  95 expect to receive from CRYTUR in May [1] Expect to start shipping crystals in the 2nd week of April.
  
  Total 1617
- Disassemble the CCAL prototype [2][3][4]
- George (DSG group) is unwrapping CCAL modules and removing LMS caps. He'll also work on preshaping ESR reflectors (100 pcs) for CRYTUR.
- Mindy (DSG group) solder wires to sockets (while waiting for crystals). She will continue with crystal wrapping during next week.
Module fabrication -- Sasha
- Fabricated modules: Total 1482
  Currently available for fabrication: 0 (modules will be available during next week)
Testing of PMT dividers -- Sasha / Arshak
- FCAL2 modules with dividers installed on the CCAL [5]
Installation of the FCAL2 detector & integration to GlueX -- Sasha / Arshak
- Detector installation page
- Updates from the meetings with Tim's group [6]
- Manpower and division of tasks
- Projects for summer students
- Summer Students (2023)
- Meeting with Hovanes (Slow control)
  Translation tables [7]
Light Monitoring System -- Arshak
- Update on LMS
Simulations/Analysis

@@ Line 9: / Line 9: @@
 **: 1450 (modules)
 **: 32 (ready for fabrication)
-**: 40 (installed on CCAL) available on March 20
+**: 40 (installed on CCAL)
 **:  (some CCAL crystals from the inner part will not be used for the FCAL2)
 **: 95 expect to receive from CRYTUR in May [https://halldweb.jlab.org/wiki/index.php/CRYTUR ] Expect to start shipping crystals in the 2nd week of April.
 **: Total 1617
-** Disassemble the CCAL prototype
+** Disassemble the CCAL prototype [https://halldweb.jlab.org/detectors/fcal2/installation/photos/ccal_good.jpg][https://halldweb.jlab.org/detectors/fcal2/installation/photos/ccal_remove_lms.jpg][https://halldweb.jlab.org/detectors/fcal2/installation/photos/ccal_spares.jpg]
 ** George (DSG group) is unwrapping CCAL modules and removing LMS caps. He'll also work on preshaping ESR reflectors (100 pcs) for CRYTUR.
 ** Mindy (DSG group) solder wires to sockets (while waiting for crystals). She will continue with crystal wrapping during next week.