Difference between revisions of "JLAB Fiber test results"
From GlueXWiki
(→Kuraray Fiber tests) |
(→Kuraray Fiber tests) |
||
Line 34: | Line 34: | ||
=> Attenuation length L = 605.8 cm | => Attenuation length L = 605.8 cm | ||
+ | </pre> | ||
+ | |||
+ | |||
+ | = Saint Gobain Fiber tests = | ||
+ | The following fibers from Saint Gobain (aka Bicron) have been tested for light output with a Sr90 source. | ||
+ | * GREEN | ||
+ | # BCF20 Set2 1/8 #5 <br> This fiber is not very strait after about 100cm it starts to be wobbly. | ||
+ | <pre> | ||
+ | position #photo-electrons | ||
+ | ============================= | ||
+ | 192cm 1.74 +/- 0.01 | ||
+ | 100cm 2.17 +/- 0.02 | ||
+ | |||
+ | => Attenuation length L = 447 cm | ||
</pre> | </pre> |
Revision as of 15:12, 28 August 2008
Kuraray Fiber tests
The following fibers from Kuraray have been tested for light output with a Sr90 source.
- BLUE
- 81 MC lot:0801/103
position #photo-electrons ============================= 165cm 3.7 +/- 0.08 65cm 5.1 +/- 0.2 194cm 3.2 +/- 0.05 => Attenuation length L = 300cm
- 78 MC lot:0801/104
position #photo-electrons ============================= 194cm 3.9 +/- 0.07 94cm 5.97+/- 0.27 61cm 6.99+/- 0.31 => Attenuation length L = 230cm
- GEEN
- 3HF MC lot:0801/105
position #photo-electrons ============================= 65cm 2.3 +/- 0.03 165cm 1.95 +/- 0.01 61cm 2.3 +/- 0.03 161cm 1.95 +/- 0.02 => Attenuation length L = 605.8 cm
Saint Gobain Fiber tests
The following fibers from Saint Gobain (aka Bicron) have been tested for light output with a Sr90 source.
- GREEN
- BCF20 Set2 1/8 #5
This fiber is not very strait after about 100cm it starts to be wobbly.
position #photo-electrons ============================= 192cm 1.74 +/- 0.01 100cm 2.17 +/- 0.02 => Attenuation length L = 447 cm