Difference between revisions of "JLAB Fiber test results"
From GlueXWiki
(→Saint Gobain Fiber tests) |
(→Saint Gobain Fiber tests) |
||
| Line 40: | Line 40: | ||
The following fibers from Saint Gobain (aka Bicron) have been tested for light output with a Sr90 source. | The following fibers from Saint Gobain (aka Bicron) have been tested for light output with a Sr90 source. | ||
* GREEN | * GREEN | ||
| − | # BCF20 Set2 1/8 #5 <br> This fiber is not very strait after about 100cm it starts to be wobbly.<pre> | + | # BCF20 Set2 1/8 #5 <br> This fiber is not very strait after about 100cm it starts to be wobbly.<pre> position #photo-electrons |
| − | + | ||
============================= | ============================= | ||
192cm 1.74 +/- 0.01 | 192cm 1.74 +/- 0.01 | ||
Revision as of 15:13, 28 August 2008
Kuraray Fiber tests
The following fibers from Kuraray have been tested for light output with a Sr90 source.
- BLUE
- 81 MC lot:0801/103
position #photo-electrons
=============================
165cm 3.7 +/- 0.08
65cm 5.1 +/- 0.2
194cm 3.2 +/- 0.05
=> Attenuation length L = 300cm
- 78 MC lot:0801/104
position #photo-electrons
=============================
194cm 3.9 +/- 0.07
94cm 5.97+/- 0.27
61cm 6.99+/- 0.31
=> Attenuation length L = 230cm
- GEEN
- 3HF MC lot:0801/105
position #photo-electrons
=============================
65cm 2.3 +/- 0.03
165cm 1.95 +/- 0.01
61cm 2.3 +/- 0.03
161cm 1.95 +/- 0.02
=> Attenuation length L = 605.8 cm
Saint Gobain Fiber tests
The following fibers from Saint Gobain (aka Bicron) have been tested for light output with a Sr90 source.
- GREEN
- BCF20 Set2 1/8 #5
This fiber is not very strait after about 100cm it starts to be wobbly.position #photo-electrons
============================= 192cm 1.74 +/- 0.01 100cm 2.17 +/- 0.02
=> Attenuation length L = 447 cm
