Revision as of 14:40, 27 May 2010

Teleconference Time: 11:00 a.m. EDT

• ESNET and EVO session
• Phone in CC F326 is 757-269-6337
• Phone in the Regina Videoconference Suite is 306-585-4204
• Phone only if requested:
  • +1-800-377-8846 : US
  • +1-888-276-7715 : Canada
  • +1-302-709-8424 : International
  • then enter participant code: 77438230# (remember the "#"). Phone line by request only.

Items for followup from previous meeting(s)

1. Monitoring
   • USM: Send drawings of guides to be machined (soon). Send 4 unpolished guides to UofR and 2 unpolished guides to Athens.
   • Bcal: Testing to see if LED sources can be viewed by pmts on both sides of the module (UofR/UofA).
2. Fcal
   • Decision on rad hard detectors
   • Ashot to send type of Hamamatsu pmt used for PRIMEX

Discussion of Options for Radiation-Hard Insert

Options for Radiation-Hard Insert

Tentative Agenda

1. Announcements
2. Review of Action Items
3. Calibration/Monitoring (Zisis)
4. FCAL
   1. Construction status
   2. FCAL Fabrication Readiness Review
   3. To shashlyk or not to shashlyk. Options (Elton) see Table. Physics Impact, see GlueX-doc-1481
   4. PbWO Insertion. (Ashot) . see [1]

1. BCAL
   1. Calorimeter input to PAC (Zisis)
   2. Construction Status
   3. Lead: 6th order of 13cm-wide sheets
   4. Fibres: Media:FibresAttenLenShips1-12.png
   5. Npe corrected numbers: Media:ZoomedPage31.png and Media:ZoomedPage38.png
   6. USM MPPC test stand design update
2. Simulations
3. Other Updates

Minutes

Attendees: