PMT rate tests

From GlueXWiki
Revision as of 13:15, 9 February 2017 by Zihlmann (Talk | contribs) (→‎PMT Rate Tests)

Jump to: navigation, search

PMT Rate Tests

We test the signal output of the Hamamatsu PMT assembly H10534MOD. This is based on a 10 stage tube with two outputs. The test are performed using a reference PMT assembly in a laser beam where the light output of the laser is adjusted to generate a signal in the reference PMT assembly that is similar to what is seen by the PMTs in the TOF paddle at 1550V operating voltage. One can clearly see that at 5MHz the signal is distorted as the PMT can not handle the increased current. At this point the current in the PMT increased by about 3uA from initially 253uA at 1kHz. At 2MHz the current was still at 253uA.

  • Reference PMT with laser output at 6.12
    • PMT HV 1550V 1kHz
      Pmt ref 1kHz 1550V.png
    • PMT HV 1550V 1kHz zoom
      Pmt ref 1kHz 1550V zoom.png
    • PMT HV 1300V 1kHz
      Pmt ref 1kHz 1300V.png
    • PMT HV 1300V 1kHz zoom
      Pmt ref 1kHz 1300V zoom.png
    • PMT HV 1300V 2MHz
      Pmt ref 2MHz 1300V.png
    • PMT HV 1300V 5MHz
      Pmt ref 5MHz 1300V.png
    • PMT HV 1300V 10MHz
      Pmt ref 10MHz 1300V.png
Retrieved from "https://halldweb.jlab.org/wiki/index.php?title=PMT_rate_tests&oldid=79640"