Difference between revisions of "Drift Chamber Alignment"
From Hall D Ops Wiki
(Created page with "__TOC__ ==Main Page== ==Tune Electron Beam== ==Tune Photon Beam== ==One Week Pause in Running== ==[[Collect Beam Data for Detector...") |
(→Drift Chamber Alignment) |
||
Line 7: | Line 7: | ||
==[[Optimize Detector Settings]]== | ==[[Optimize Detector Settings]]== | ||
==Drift Chamber Alignment== | ==Drift Chamber Alignment== | ||
+ | # Goal: Collect data with no or low field. | ||
+ | # Responsibility: HallD | ||
+ | # Conditions: | ||
+ | #* Tagger hall equipment in place and operating. | ||
+ | #* Beam 50nA CW | ||
+ | #* Radiator is 10<sup>-4</sup>. | ||
+ | #* Collimator hole is 3.5mm. | ||
+ | #* Solenoid 0-300A depending on backgrounds. | ||
+ | #* GlueX detectors are on. | ||
+ | #* Thin commissioning target at various positions. | ||
+ | # Activities | ||
+ | #* If time permits, collect data with target in several positions. | ||
+ | |||
==[[Collect More Regular Data]]== | ==[[Collect More Regular Data]]== |
Revision as of 10:48, 2 July 2014
Contents
Main Page
Tune Electron Beam
Tune Photon Beam
One Week Pause in Running
Collect Beam Data for Detector Checkout
Optimize Detector Settings
Drift Chamber Alignment
- Goal: Collect data with no or low field.
- Responsibility: HallD
- Conditions:
- Tagger hall equipment in place and operating.
- Beam 50nA CW
- Radiator is 10-4.
- Collimator hole is 3.5mm.
- Solenoid 0-300A depending on backgrounds.
- GlueX detectors are on.
- Thin commissioning target at various positions.
- Activities
- If time permits, collect data with target in several positions.