Difference between revisions of "Optimize Detector Settings"
From Hall D Ops Wiki
(Created page with "__TOC__ ==Main Page== ==Tune Electron Beam== ==Tune Photon Beam== ==One Week Pause in Running== ==[[Collect Beam Data for Detector...") |
(→Optimize Detector Settings) |
||
Line 6: | Line 6: | ||
==[[Collect Beam Data for Detector Checkout]]== | ==[[Collect Beam Data for Detector Checkout]]== | ||
==Optimize Detector Settings== | ==Optimize Detector Settings== | ||
+ | # Goal: Verify optimal settings for detectors. | ||
+ | # Responsibility: HallD | ||
+ | # Conditions: | ||
+ | #* Tagger hall equipment in place and operating. | ||
+ | #* Beam 50nA CW | ||
+ | #* Radiator is 10<sup>-4</sup>. | ||
+ | #* Collimator hole is 3.5mm. | ||
+ | #* Solenoid on at 1200A | ||
+ | #* GlueX detectors are on. | ||
+ | #* Thin commissioning target at nominal position. | ||
+ | # Activities | ||
+ | #* If time permits, dedicated running to optimize settings of detectors will be carried out. | ||
+ | |||
==[[Drift Chamber Alignment]]== | ==[[Drift Chamber Alignment]]== | ||
==[[Collect More Regular Data]]== | ==[[Collect More Regular Data]]== |
Revision as of 10:48, 2 July 2014
Contents
Main Page
Tune Electron Beam
Tune Photon Beam
One Week Pause in Running
Collect Beam Data for Detector Checkout
Optimize Detector Settings
- Goal: Verify optimal settings for detectors.
- Responsibility: HallD
- Conditions:
- Tagger hall equipment in place and operating.
- Beam 50nA CW
- Radiator is 10-4.
- Collimator hole is 3.5mm.
- Solenoid on at 1200A
- GlueX detectors are on.
- Thin commissioning target at nominal position.
- Activities
- If time permits, dedicated running to optimize settings of detectors will be carried out.