Content:
# DSC2_WIDTH 20 40 <- TDC width (ns), TRG width (ns)
# DSC2_THRESHOLD 20 50 <- board threshold: TDC threshold (mV), TRG threshold (mV)
#
# TS_TRIG_TYPE 1 - Internal Pulser
# 2 - External FP
# 4 - GTP
# 6 - GTP + External
#
#
# TS_FP_INPUTS - List of enabled FP inputs
#
#
# TS_SOFT_TRIG
# Trigger type (type 1 or 2 for playback)
# Number of events to trigger
# Period multiplier (depends on range 0-0x7FFF)
# Range 1 - min 120ns, increments of 30ns up to 983.13u
# 2 - min 120ns, increments of 30.72us up to 1.007s
#
#
# TI_MASTER 1 - Stand alone with master TI
#
# TI_MASTER_TRIG 1 - soft, 2 - external pulser, 3 - playback
#
# TI_SOFT_TRIG
# Trigger type (type 1 or 2 for playback)
# Number of events to trigger
# Period multiplier (depends on range 0-0x7FFF)
# Range 1 - min 120ns, increments of 30ns up to 983.13u
# 2 - min 120ns, increments of 30.72us up to 1.007s
#
# F1TDC_CLOCK 0 <- Clock Source (0 = Internal 32 MHz)
# (1 = External 31.25 MHz)
# F1TDC_VERSION 2 <- Module Version (2 = High Resolution, synchronous, 32 channels)
# (3 = Normal Resolution, synchronous, 48 channels)
# set bin size from 0.056 to 0.058 -> Beni!
# F1TDC_BIN_SIZE 0.058 <- Bin size (ns)
# F1TDC_LATENCY 3000.0 <- Trigger latency (ns)
# F1TDC_WINDOW 1000.0 <- Trigger window (ns)
==========================
TRIGGER
==========================
#CALIBRATION 1
TS_TRIG_TYPE 2
TS_FP_INPUTS 3
TS_SOFT_TRIG 1 64000 0x1FFF 1
#TS_TD_SLOTS 3 4 5 6 7 8 9 10 14
TS_TD_SLOTS 10 9 14
# TS_FP_DELAY 3 427
# TS_FP_DELAY 3 480
TS_FP_DELAY 3 500
# SSP SLOT FIBER_EN SUM_ENABLE
SSP_SLOT 9 0x3F 1
SSP_SLOT 10 0x3F 1
# TYPE DELAY INT_WIDTH ENABLE
TRIG_EQ PS 20 10 0
TRIG_EQ BCAL_E 20 10 0
TRIG_EQ BCAL_C 20 10 0
TRIG_EQ FCAL 20 10 1
TRIG_EQ ST 20 10 0
TRIG_EQ TOF 20 10 0
# TYPE LATENCY WIDTH FCAL_E BCAL_E EN_THR NHIT LANE
TRIG_TYPE PS 420 20 1300 1900 1100 0 -1
TRIG_TYPE BFCAL 440 20 1 0 2000 0 -1
TRIG_TYPE BFCAL 440 20 1 0 1500 0 -1
TRIG_TYPE BFCAL 440 20 1 0 1500 0 0
TRIG_TYPE BCAL_COS 440 40 1500 2100 1300 0 -1
TS_GTP_PRES 0 1
TRIG_DELAY 0
DAC_CALIB 0
# TEST 2, THR = 3
TS_TRIG_HOLD 1 10 0
TS_TRIG_HOLD 2 127 0
TS_TRIG_HOLD 4 40 0
TS_TRIG_HOLD 3 2 1
TI_FIBER_LATENCY_OFFSET 0x98
TI_MASTER 0
TI_MASTER_TRIG 1
TI_FP_INPUTS 3
# TI_SOFT_TRIG 1 10000 0x7FFF 1
TI_SOFT_TRIG 1 10000 0x600 1
TI_FIBER_EN
BLOCKLEVEL 40
BUFFERLEVEL 4
==========================
GLOBAL
==========================
F1TDC_BIN_SIZE 0.058
FADC250_BUSY 3
FADC125_BUSY 3
FADC250_FORMAT 2
FADC125_FORMAT 1
==========================
FCAL
==========================
FADC250_MODE 9
FADC250_W_OFFSET 850
# FADC250_W_OFFSET 400
FADC250_W_WIDTH 100
FADC250_NSB 3
FADC250_NSA 20
FADC250_NPEAK 1
FADC250_READ_THR 108
#FADC250_READ_THR 150
#FADC250_READ_THR 125
FADC250_TRIG_BL 100
#FADC250_TRIG_THR 200
FADC250_TRIG_THR 165
#FADC250_TRIG_THR 100
FADC250_TRIG_NSB 3
FADC250_TRIG_NSA 10
FADC250_COM_DIR /gluex/CALIB/ALL/fadc250/default
FADC250_COM_VER default
#FADC250_COM_DIR /gluex/CALIB/ALL/fadc250
#FADC250_COM_VER Run_2661
#FADC250_USER_DIR /home/somov/setups/tagh/parms/common/user
#FADC250_USER_VER beam
FADC250_USER_DIR /gluonfs1/gluex/Subsystems/FCAL/FCAL_Analysis/DAQ/config/spring_2015
FADC250_USER_VER spring2015v2
#FADC250_USER_VER beamManny
==========================
BCAL
==========================
# change offset from 905 to 885 -> Beni 6.10.2014 afternoon
# also change NSB and NSA from 3/6 to 5/40
FADC250_MODE 8
FADC250_W_OFFSET 825
FADC250_W_WIDTH 100
FADC250_NSB 5
# Dalton: increased NSA from 40
FADC250_NSA 55
FADC250_NPEAK 1
# MMD threshold from 110 to 105 (2014-12-05)
FADC250_READ_THR 105
#FADC250_READ_THR 120
FADC250_TRIG_BL 100
FADC250_TRIG_THR 120
FADC250_TRIG_NSB 3
FADC250_TRIG_NSA 15
FADC250_COM_DIR /gluex/CALIB/ALL/fadc250
#FADC250_COM_VER Run_1270
FADC250_COM_VER Run_1649
#FADC250_COM_VER Run_1762
FADC250_USER_DIR /gluex/CALIB/ALL/user
FADC250_USER_VER SF1
#CTP_BCAL_THR 56000
#CTP_THR 10
# F1 TDC
#change latency from 900. to 3540. and window from 500 to 1000 ->Beni
F1TDC_WINDOW 1000.
F1TDC_LATENCY 3400.
# set bin size from 0.056 to 0.058 -> Beni!
#F1TDC_BIN_SIZE 0.058
F1TDC_CLOCK 1
# LE discriminator
DSC2_WIDTH 40 40
DSC2_THRESHOLD 35 50
==========================
ST
==========================
#change latency to 925 by BENI
# also change NSA and NSB from 3/6 to 5/20
FADC250_MODE 8
FADC250_W_OFFSET 824
FADC250_W_WIDTH 100
FADC250_NSB 5
FADC250_NSA 20
FADC250_NPEAK 1
# change FADC250_READ_THR from 800 -> 110 by pooser (5 mV)
# change FADC250_READ_THR from 110 -> 120 by pooser (10 mV)
FADC250_READ_THR 120
FADC250_TRIG_BL 100
FADC250_TRIG_THR 150
FADC250_TRIG_NSB 3
FADC250_TRIG_NSA 15
FADC250_COM_DIR /gluex/CALIB/ALL/fadc250
FADC250_COM_VER Run_1270
FADC250_USER_DIR /home/
FADC250_USER_VER
# F1 TDC
# change latency from 2100 to 3700
F1TDC_WINDOW 1000.
F1TDC_LATENCY 3460.
# set bin size from 0.056 to 0.058 -> Beni!
#F1TDC_BIN_SIZE 0.058
F1TDC_CLOCK 1
# LE discriminator
# change DSC2_THRESHOLD from 100 -> 50 by pooser
DSC2_WIDTH 40 40
DSC2_THRESHOLD 50 60
==========================
TOF
==========================
# change latency and width from 510/200 to 910/100
# and change NSB and NSA from 3/6 to 5/20
# btw. it is BENI
# changed NSB & NSA from 5/20 to 10/45 (eugenio)
FADC250_MODE 8
FADC250_W_OFFSET 810
FADC250_W_WIDTH 100
FADC250_NSB 10
FADC250_NSA 45
FADC250_NPEAK 1
FADC250_READ_THR 210
FADC250_TRIG_BL 200
FADC250_TRIG_THR 210
FADC250_TRIG_NSB 3
FADC250_TRIG_NSA 15
FADC250_COM_DIR /gluex/Subsystems/TOF/parms/common/fadc250
FADC250_COM_VER ver1
#FADC250_COM_DIR /gluex/CALIB/ALL/fadc250
#FADC250_COM_VER Run_1270
FADC250_USER_DIR /home/
FADC250_USER_VER
CTP_BCAL_THR 56000
# LE discriminator
DSC2_WIDTH 20 40
DSC2_THRESHOLD 30 50
# CAEN 1290
#TDC1290_W_WIDTH 750
TDC1290_W_WIDTH 3800
#TDC1290_W_OFFSET -1750
#TDC1290_W_OFFSET -3640
TDC1290_W_OFFSET -3660
TDC1290_W_EXTRA 25
TDC1290_W_REJECT 50
TDC1290_BLT_EVENTS 1
TDC1290_N_HITS 64
TDC1290_ALMOSTFULL 16384
TDC1290_OUT_PROG 2
TDC1290_A24_A32 2
TDC1290_SNGL_BLT 3
TDC1290_SST_RATE 0
TDC1290_BERR_FIFO 1
TDC1290_EDGE 2
==========================
CDC
==========================
#Normal Running
FADC125_MODE 8
FADC125_W_OFFSET 450
FADC125_W_WIDTH 180
FADC125_NSB 5
FADC125_NSA 80
FADC125_NPEAK 1
FADC125_THR 70
FADC125_DAC 800
FADC125_F_REV 0x0219
FADC125_B_REV 0x0908
FADC125_P_REV 0x0908
FADC125_TYPE 0xf125
#FADC125_COM_DIR /gluex/release/0.1/cdc/parms/common/fadc125
#FADC125_COM_VER ver1
#FADC125_COM_DIR /gluex/CALIB/ALL/fadc125
#FADC125_COM_VER Run_1070
FADC125_COM_DIR /gluex/CALIB/CDC/HVTScan
FADC125_COM_VER ver1
FADC125_USER_DIR /gluex/
FADC125_USER_VER
==========================
FDC
==========================
FADC125_MODE 8
FADC125_W_OFFSET 430
FADC125_W_WIDTH 100
FADC125_NSB 3
FADC125_NSA 40
FADC125_NPEAK 1
FADC125_THR 70
FADC125_DAC 800
#FADC125_COM_DIR /home/somov/setups/cdc_ts/parms/common/fadc125
#FADC125_COM_VER ver1
FADC125_COM_DIR /gluex/CALIB/ALL/fadc125
#FADC125_COM_VER Run_1070
FADC125_COM_VER Run_1269
FADC125_USER_DIR /home/
FADC125_USER_VER
# F1 TDC
# change latency and window back to what we expect from ADCs (Beni)
F1TDC_WINDOW 1400.
F1TDC_LATENCY 3560.
#F1TDC_BIN_SIZE 0.112
# High-resolution board in slot 17
# changed by Beni (loser) 2014.10.6
F1TDC_HR_WINDOW 1000.
F1TDC_HR_LATENCY 1160.
# set bin size from 0.056 to 0.058 -> Beni!
#F1TDC_HR_BIN_SIZE 0.058
F1TDC_CLOCK 1
==========================
TAGM
==========================
FADC250_MODE 8
#FADC250_W_OFFSET 895
FADC250_W_OFFSET 905
FADC250_W_WIDTH 100
FADC250_NSB 3
FADC250_NSA 6
FADC250_NPEAK 1
# For low gain mode
FADC250_READ_THR 115
# For high gain mode
#FADC250_READ_THR 180
FADC250_TRIG_BL 100
FADC250_TRIG_THR 210
FADC250_TRIG_NSB 3
FADC250_TRIG_NSA 15
#FADC250_COM_DIR /gluex/release/0.1/tagm/parms/common/fadc250
#FADC250_COM_VER ver1
FADC250_COM_DIR /gluex/CALIB/ALL/fadc250
#FADC250_COM_VER Run_1270
FADC250_COM_VER Run_1905
FADC250_USER_DIR /home/
FADC250_USER_VER
CTP_USE 0
# F1 TDC
F1TDC_WINDOW 600.
F1TDC_LATENCY 3600.
#F1TDC_BIN_SIZE 0.056
F1TDC_CLOCK 1
# LE discriminator
# Change for high gain mode
DSC2_WIDTH 40 40
#DSC2_THRESHOLD 10 60
DSC2_THRESHOLD 20 20
==========================
TAGH
==========================
FADC250_MODE 8
#FADC250_W_OFFSET 895
FADC250_W_OFFSET 905
FADC250_W_WIDTH 100
FADC250_NSB 3
FADC250_NSA 6
FADC250_NPEAK 1
FADC250_READ_THR 300
FADC250_TRIG_BL 100
FADC250_TRIG_THR 200
FADC250_TRIG_NSB 3
FADC250_TRIG_NSA 15
#FADC250_COM_DIR /home/somov/setups/tagh/parms/common/fadc250
#FADC250_COM_VER ver1
FADC250_COM_DIR /gluex/CALIB/ALL/fadc250
FADC250_COM_VER Run_1270
FADC250_USER_DIR /home/
FADC250_USER_VER
CTP_USE 0
# F1 TDC
F1TDC_WINDOW 600.
F1TDC_LATENCY 3600.
#F1TDC_BIN_SIZE 0.056
F1TDC_CLOCK 1
# LE discriminator
DSC2_WIDTH 40 40
DSC2_THRESHOLD 45 45
==========================
PS
==========================
FADC250_MODE 8
FADC250_W_OFFSET 880
FADC250_W_WIDTH 100
FADC250_NSB 3
FADC250_NSA 6
FADC250_NPEAK 1
FADC250_READ_THR 250
FADC250_TRIG_BL 100
FADC250_TRIG_THR 500
FADC250_TRIG_NSB 3
FADC250_TRIG_NSA 15
FADC250_COM_DIR /home/somov/setups/tagh/parms/common/fadc250
FADC250_COM_VER ver2
FADC250_USER_DIR /home/somov/conf/cosmic
FADC250_USER_VER
==========================
PSC
==========================
FADC250_MODE 8
FADC250_W_OFFSET 800
FADC250_W_WIDTH 100
FADC250_NSB 3
FADC250_NSA 6
FADC250_NPEAK 1
FADC250_READ_THR 250
FADC250_TRIG_BL 100
FADC250_TRIG_THR 500
FADC250_TRIG_NSB 3
FADC250_TRIG_NSA 10
# F1 TDC
F1TDC_WINDOW 500.
F1TDC_LATENCY 900.
# set bin size from 0.056 to 0.058 -> Beni!
#F1TDC_BIN_SIZE 0.056
F1TDC_CLOCK 1
# LE discriminator
DSC2_WIDTH 40 40
DSC2_THRESHOLD 50 100