Revision as of 10:44, 2 April 2020

Meeting Time: 11:00 a.m.

1. To join via a Web Browser, go to the page [1] https://bluejeans.com/907185247.
2. To join via Polycom room system go to the IP Address: 199.48.152.152 (bjn.vc) and enter the meeting ID: 907185247.
3. To join via phone, use one of the following numbers and the Conference ID: 907185247.
   • US or Canada: +1 408 740 7256 or
   • US or Canada: +1 888 240 2560
4. Upon connection all microphones are automatically muted. To unmute your mike on a Polycom or equivalent unit, enter *4. Unmuting on a computer is trivial as there is a microphone button than can be clicked.
5. More information on connecting to bluejeans is available.

Participant Direct Lines

• JLab Phone in CC L207 is 757-269-7084 (usual room)
• JLab Phone: in CC F326 is 757-269-6460
• Phone in the Regina Video-conference Suite is 306-585-4204
• Athens Phone: in Christina's office is 011-30-210-727-6947

References

1. FCAL HDFCAL log book
2. BCAL HDBCAL log book

Goals for Calorimetry Group

1. Determine preliminary photon reconstruction efficiencies as a function of E, phi and theta in data and simulation with a point-to-point precision of at least 5%.
2. Measure systematics of pi0/eta mass calibration as a function of detector position to a precision of at east 5 MeV.
3. Demonstrate agreement of photon reconstruction efficiency and resolution between data and simulation as a function of E, phi and theta to within 5%.

Action Items

1. Check switches on FCAL board with high scaler rates and make sure it is set to 2 V full scale. (Colin and Sasha)
2. Move monitoring plots of the FCAL/BCAL front panel triggers into FCAL/BCAL monitoring section (Zisis)
3. Complete calibrations by April 1? See 2020 Data Production

Long term items

Tentative Agenda

1. Announcements
   • Announcement at Production and Analysis meeting.
   • Complete calibrations by April 1? See 2020 Data Production
   • Monitoring Plan
     • Current Monitoring Page
2. Action Items
3. Run Updates
   1. FCAL
   2. BCAL
4. Calibrations
   1. PrimEx gain calibration PrimEx Gain update
   2. Spring 2020 GlueX gain calibration
      1. Calibrated for the batch1 runs- 71350 - 71591
      2. Started with Fall 2018 gains with Mark's gain ratios applied to it.
      3. So far 12 Iterations are done. The gain procedure is going smooth until now. gainsSpring2020
5. Monitoring
6. Reconstruction
7. Efficiencies
8. Simulations
9. NIM articles
10. Any other business

Minutes

Attending: