Difference between revisions of "BCAL"

From GlueXWiki
Jump to: navigation, search
(Roadmap toward a decision for Bcal Readout)
(Roadmap toward a decision for Bcal Readout)
Line 22: Line 22:
  
 
=== Roadmap toward a decision for Bcal Readout===
 
=== Roadmap toward a decision for Bcal Readout===
#Technical specifications, already outlined in GlueX-doc-795
+
#Technical specifications, already outlined in [http://argus.phys.uregina.ca/cgi-bin/private/DocDB/ShowDocument?docid=795 GlueX-doc-795]
#*  SiPM tests are underway
+
#*  [http://www.jlab.org/Hall-D/sipm_dev SiPM tests are underway]
#* Werner has recent results of tests of fine mesh PMTs
+
#* Werner has recent results of tests of fine mesh PMTs reported in [http://argus.phys.uregina.ca/cgi-bin/private/DocDB/ShowDocument?docid=1173 GlueX-doc-1173]
 
# Geometry, especially related to acceptance gap between Bcal and Fcal. Detailed plan should be developed.
 
# Geometry, especially related to acceptance gap between Bcal and Fcal. Detailed plan should be developed.
 
#*  Light guides and inactive material is different for the two options. We need to simulate the effect of each
 
#*  Light guides and inactive material is different for the two options. We need to simulate the effect of each
#* Precise configuration of light guides for FM pmts on the upstream end, where the field at the end of the Bcal exceeds 0.5 T.
+
#* Precise configuration of light guides for FM pmts on the upstream end, where the field at the end of the Bcal exceeds 0.5 T. See light guides studies in [http://argus.phys.uregina.ca/cgi-bin/private/DocDB/ShowDocument?docid=1077 GlueX-doc-1077]
 
#* Detail description of cables and electronics on each detector
 
#* Detail description of cables and electronics on each detector
 
# Granularity.
 
# Granularity.
Line 39: Line 39:
 
#* Resolution for various geometry options (mentioned above).
 
#* Resolution for various geometry options (mentioned above).
 
# Detailed B-field plots including dependence on B-field components
 
# Detailed B-field plots including dependence on B-field components
 +
#* [http://argus.phys.uregina.ca/cgi-bin/private/DocDB/ShowDocument?docid=912 Magnetic fields at the location of detector pmts]
 
# Dynamic range required, especially for near pmt/small angle showers.
 
# Dynamic range required, especially for near pmt/small angle showers.
  

Revision as of 09:40, 5 February 2009

BCAL.png

Meetings

Ongoing Activities

Scintillation Fibers

Readout

Roadmap toward a decision for Bcal Readout

  1. Technical specifications, already outlined in GlueX-doc-795
  2. Geometry, especially related to acceptance gap between Bcal and Fcal. Detailed plan should be developed.
    • Light guides and inactive material is different for the two options. We need to simulate the effect of each
    • Precise configuration of light guides for FM pmts on the upstream end, where the field at the end of the Bcal exceeds 0.5 T. See light guides studies in GlueX-doc-1077
    • Detail description of cables and electronics on each detector
  3. Granularity.
    • Optimization of distribution between inner and outer detectors
    • Which detectors should have discriminators and TDCs
    • Study of signal splitting, choice of discriminator - has an impact on number of cables.
  4. Resolution
  5. Detailed B-field plots including dependence on B-field components
  6. Dynamic range required, especially for near pmt/small angle showers.

Silicon PM

Fine Mesh PMT

Light Guides

Magnetic Field

Monte Carlo

Electronics

Beam tests

Pb Sheet Widths

BCAL Construction and Mechanical Issues

Action Item Tracker

Archives

GlueX-notes: 985, 986, 987 and 989 document the Barrel Calorimeter as per the February 2008 Calorimeter Review.