Revision as of 18:49, 31 March 2020

This page contains the procedure for checking if production runs are of good quality and can be used for physics analysis.

Run Periods

• RunPeriod-2016-02 Validation
• RunPeriod-2016-10 Validation
• RunPeriod-2017-01 Validation
• RunPeriod-2018-01 Validation
• RunPeriod-2018-08 Validation
• RunPeriod-2019-01 Validation
• RunPeriod-2019-11 Validation

Procedure

For each production run, do the following:

• Go to the | Offline Run Browser page.
• Follow the steps outlined in the checklist below.
• Certify that each section is okay
  • (DB + script to be developed)
• Set run status = 1 in RCDB
  • (script provided)

Run Statuses

• -1 - unchecked
• 0 - rejected (not physics-quality)
• 1 - approved
• 2 - approved long/"mode 8" data
• 3 - calibration / systematic studies

Checklist

Example Monitoring Spreadsheet

Reference run for 2017-01: 30780

Reference run for 2018-01: 40933/4

Reference run for 2018-08: 51388

Reference run for 2019-11: 71724 (150 nA), 71469 (250 nA), 71463 (350 nA) [for now!]

General Notes

• Diamond and amorphous (AMO) runs have different beam energy spectra, which leads differences in reaction yields distributions which depend on the kinematics of the produced particles.

BCAL

• Check Occupancy - Reference: [ link ]
• Check Hit Efficiency - Reference: [ link ]
• Check Recon. BCAL 1 - Reference: [ link ]
• Check Recon. BCAL 2 - Reference: [ link ]
• Check BCAL Matching - Reference: [ link ]

CDC

• Check Occupancy - Reference: [ link ]
• Check Time-to-distance - Reference: [ link ]
• Check dE/dx - Reference: [ link ]
  • Check Efficiency- Reference: [ link ]

FCAL

• Check Occupancy - Reference: [ link ]
• Check FCAL Hits 1 - Reference: [ link ]
• Check FCAL Hits 2 - Reference: [ link ]
• Check FCAL Clusters 1 - Reference: [ link ]
• Check FCAL Recon. 1 - Reference: [ link ]
• Check FCAL Recon. 2 - Reference: [ link ]
• Check Recon. FCAL Matching - Reference: [ link ]

FDC

• Check Package 1 Occupancy - Reference: [ link ]
• Check Package 2 Occupancy - Reference: [ link ]
• Check Package 3 Occupancy - Reference: [ link ]
• Check Package 4 Occupancy - Reference: [ link ]

PS

• Check Occupancy - Reference: [ link ]
• Check Timing Alignment - Reference: [ link ]

SC

• Check Occupancy - Reference: [ link ]
• Check Recon. SC 1 - Reference: [ link ]
• Check Recon. SC 2 - Reference: [ link ]
• Check Recon. SC Matching - Reference: [ link ]

TAGH

• Check Tagger Occupancy - Reference: [ link ]
• Check TAGH Hits 2 - Reference: [ link ]

TAGM

• Check Timing ADC-RF - Reference: [ link ]
• Check Timing T-ADC - Reference: [ link ]

TOF

• Check Occupancy - Reference: [ link ]
• Check TOF Matching 1 - Reference: [ link ]
• Check TOF Matching 2 - Reference: [ link ]

RF

• Check timing offsets - Reference: [ link ]
  • Should be centered around zero

Timing

• Check Calorimeter Timing - Reference: [ link ]
• Check Drift Chamber Timing - Reference: [ link ]
• Check PID System Timing - Reference: [ link ]
• Check Tagger Timing - Reference: [ link ]
• Check Track Matched Timing - Reference: [ link ]
• Check Tagger/RF Timing - Reference: [ link ]
• Check Tagger/SC Timing - Reference: [ link ]

Analysis

• Tracking 1 - [ link ]
• Tracking 3 - [ link ]
• Check BCAL pi0 - Reference: [ link ]
• Check BCAL/FCAL pi0 - Reference: [ link ]
• Check p+2pi - Reference: [ link ]
• Check p+3pi - Reference: [ link ]
• Check p+pi0g - Reference: [ link ]

The list of experts on different detector/calibration